Products Service & Help Downloads Know How & More Construction manuals

These board layouts are easy to reproduce since there are no special requirements and the cunductor pathes as well as their distances are always more than 0.016" (=0.40 mm). To store any of these graphics on your PC, right-click on the link and select "Save picture as" or "Save graphic as".

The layouts are very much enlarged to give a clean etched board. When you print a layout, make sure that the contour has the given length. Exact and to the scale printouts can be produced very easily with the layout software Eagle.

The schematic and layout in EAGLE format:

For the schematic and layout plans you need the highly recommended schematic and layout editor EAGLE. A free english version can be downloaded at http://www.cadsoft.de/freeware.htm.

Download schematic and layout  (packed Eagle files, 23 KBytes)

Please note: If your browser has any problems downloading the file, right-click the link and select "Save target as..." or "Save link as...".

Schematic in GIF format:

On the first view the plan might apear a little complicated,but it really isn't. The upper left part represents the voltage regulation and stabilisation. The switches S1-1 to S1-6 are implanted with a simple 6x DIP switch. On the upper right you can see the pins rows that are located left and right of the MC and which simply offer his pins 1:1 for a solder connection. The drawn joints EP 1-0 to EP 1-15 and EP 3-0 to EP 3-15 are the extension ports. I recommend to take a close look at the circuit layers, then everything should be easily understandable.

Component placement in GIF format:

Component Placement, dimensions 2.900 * 2.500" (73,66 * 63,5 mm), bird's view on top layer

Solder layer in GIF format:

Solder Layer, dimensions 2.900 * 2.500" (73,66 * 63,5 mm), bird's view on top layer

Component layer in GIF format:

Component Layer, dimensions 2.900 * 2.500" (73,66 * 63,5 mm), bird's view on top layer

Links related to this page:

. General description...
. Partslist...

Links related to this and other pages:

. Extension modules...
. Flash MC Programmer I...
. Prog-Studio 6 Software...
. Kits and assembled devices...
. Flash MC datasheets...