Products Service & Help Downloads Know How & More Construction manuals

These board layouts can not be reproduced with simple means since cunductor pathes as well as their distances are only 0.008" (=0.20mm) for a big part. The circuit boards delivered by Batronix are produced with the professional layout.

To store any of these graphics on your PC, right-click on the link and select "Save picture as" or "Save graphic as".

The professional layouts are only published in Eagle format and not in GIF graphic format. GIF graphic printouts won't offer the same high quality that a 'direct' printout of an Eagle file offers.

IMPORTANT: This circuit is under copyright by the company Batronix. You can build and use it for your own puposes but you are not allowed to trade with your own rebuilds!

The schematic and layout in EAGLE format:

For the schematic and layout plans you need the highly recommended schematic and layout editor EAGLE. A free english version can be downloaded at http://www.cadsoft.de/freeware.htm.

Download schematic and layout  (packed Eagle files, 27 KBytes)

Please note: If your browser has any problems downloading the file, right-click the link and select "Save target as..." or "Save link as...".

Schematic in GIF format:

On the first view the plan might apear a little complicated,but it really isn't. The upper left part represents the voltage regulation and stabilisation. The switches S1-1 to S1-8 are implanted with a simple 8x DIP switch. On the upper right you can see the pins rows that are located left and right of the MC and which simply offer his pins 1:1 for a solder connection. The drawn joints EP 0-0 to EP 3-15 are the extension ports. I recommend to take a close look at the circuit layers, then everything should be easily understandable.

Links related to this page:

. General description...
. Partslist...

Links related to this and other pages:

. Extension modules...
. Flash MC Programmer II...
. Prog-Studio 6 Software...
. Kits and assembled devices...
. Flash MC datasheets...