Products Service & Help Downloads Know How & More Construction manuals

With this fully matured tool you can build your own microcontroller applications. The programmer can read, write and erase the flash microcontroller AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C55, AT89C55WD, AT89C51RC, AT89S52, AT89S53, AT89S8252, AT89LS52, AT89LS8252, DS89C420, SST89F54, SST89F58. Designs with these microcontrollers are very simple because of their internal program memory. One of these unexpensive microcontrollers, three resistors, one capacitor and a quarz oscillator are all you need to build a complete, small electronic device. The microcontrollers have 32 input/output lines and from 4 to 20 kByte internal flash program memory in the 40 pin package. They run at clock frequencies up to 33MHz, consuming only about 25 milliamperes.

You will need a printer extension cable and a power supply between 12 and 24 volt with at least 100 milliampere to use this device.

Handbook:

You will find the information for construction of building kits as well as the installation, startup and operation notes in this handbook.

Please note: To save the files onto your pc, please click with your right mouse button onto the link and choose "Save target as".

PDF-File (1.8 MByte)

You don't have the time or opportunity to etch the board or you don't want to?

No problem, you can get etched boards, kits and assembled devices in German industry quality at fair prices. The etched boards were made in large amounts to reduce production cost. The small profit margin will be used to finance new developments and to improve the hard- and software products.

. Kits and assembled devices...

Links related to this page:

. Schematics and layouts (GIF & Eagle)...
. Partlist...

Links related to this and other pages:

. Prog-Studio 6 Software...
. Kits and assembled devices...
. Flash MC datasheets...