Products

 

Service

 

Software • Prog-Studio 6 •

Because there are successor products available, the Prog-Studio 6 software is only recommended for the old parallel port programmer now. For developing microcontroller applications please habe a look onto the new Prog-Studio 2007 software and for the USB programmers please use the Prog-Express Software (Freeware).

Aside from basic functions such as the reading, programming, comparison copying and erasure of chips in the Batronix programming devices, the Prog-Studio 6 software offers numerous other functions. The Hex/ASCII editor gives you many options for working with the component contents, and the MC editor integrates a comprehensive compiler/assembler/debugger for developers of microcontroller applications.

Prog-Studio 6 im Hex-Editor Modus

• Data can be loaded and saved in the binary, Intel-Hex, Motorola-S and other formats.
• The simple editing of data in the Hex editor with a comparison function as well as area processing
• Burning data onto a memory chip with a click of the mouse
• Special settings such as burning from/to a certain memory address (offset) as well as separation into even and odd addresses (splitting odd/even) are supported.
• Serial burn function for the production of large numbers of items with identical data
• Data comparison function (verify) with bit-to-bit comparison.
• Automatic comparison of the check sum during comparison (verify)
• Calculation of the check sum for editor data

Prog-Studio 6 im MC-Editor Modus

• Assembler/compiler for all MCS-51 microcontrollers (8051,...,80C535,...,89C2051,...,89C52,...,89S8252,...)
• Important information is always at hand with the supplementary "Commands" window. The hexcode, as well as the required bytes and machine cycles, are also shown for each command.
• Speedy navigation and improved overview with the supplementary "jump marks" window. The selected routine or jump mark is displayed at a click of the mouse.
• Notes can be stored in the supplementary "Notes" window and are managed separately for each created program.
• Basic support for the simple programming of frequently required partial functions such as conditions (If...Else) or loops (For...), nesting possible up to 99 levels
• Integrated debugger with single step function and stop points directly in the source code! Display of all registers (SFR) and memory addresses (RAM as well as external RAM).
• Support for all common number formats (decimal, hexadecimal, binary + ASCII), data fields (DB, DW) and allocation (EQU, BIT, DATA) as well as special directions for debugging (STOP, #IF DEBUGGING, #IF NOT DEBUGGING)
• Modular programming through the integration of header/assembler files via INCLUDE and integration of binary data via INCBYTES
• Direct assembly/compilation and burning of data in a Batronix programming device at the click of a mouse!

Download Software and Manuals

There are two handbooks for the Prog-Studio 6 software available. The first part explains the general using of the software, the hex-editor mode and the programming of chips. The second part explains the assembler/compiler for developing of microcontroller applications. Since the most user will need only the first part, we have splitted the handbook into two parts.

Information

Actual Offers

• Copyright 1999 - 2008 by Batronix Elektronik •