The new PC based logic analyzer from the Acute TravelLogic series offers professional and reliable measurement technology at an unrivalled price/performance ratio.

Thanks to the large RAM storage capacity, up to 512K measurement points can be captured per channel with the TL2136 or 2 million with the TL2236 when all 36 channels are in use. The voltage threshold level for high signals can be set to ±6 volt for the various logic families such as TTL, CMOS, or ECL, and the maximum input voltage can be up to ±40 V DC 15 Vpp AC.

Trigger Functions

The wide range of trigger options allows for easy measurements even in complex systems.

All channels can be used equally and in any combination for triggering purposes. In addition to triggering based on logic levels, the edges or signal patterns can also be used as triggers.

Decoding Function

The devices in the Acute TravelLogic series stand out particularly well due to the many available bus decoding functions, such as: 1-Wire, CAN, FlexRay, HDMI-CEC, HDQ, I2C, I2S, I80, IDE, JTAG, LCD1602, LIN, Lissajous, LPC, Microwire, NEC IR, PMBus, PS/2, RC-5, RC-6, SDIO, SerialVID, SMBus, S/PDIF, SPI, SSI, ST7669, UART, UNI/O, USB1.1 and more...

Examples:

Please click on an image below for a larger view::

Memory Allocation

Depending on the sampling rate, a certain number of channels are available and share the entire device memory. The memory is divided according to the following table.

Universal Software

The logic analyzer software can also be used to control the DS-1302 USB oscilloscope from Acute. With the aid of an oscilloscope and logic analyzer, combined measurements can be taken and displayed together: