LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS Trusted Shops Garantie
Batronix BX32P Barlino II
Batronix BX32P Barlino II
Batronix BX32P Barlino II
Batronix BX32P Barlino II
Batronix BX32P Barlino II
Batronix BX32P Barlino II
Batronix BX32P Barlino II

Batronix BX32P Barlino II

High quality and compact programmer for commonly-used memory chips.


Delivery including USB cable, software and manual on cd.

EUR 134.03

USD 185.-

Without VAT, Plus Shipping Costs


5 ... pieces:
EUR 120.63 / USD 156.-

Availability:

5 years warranty

30 days trial period

Made in Germany

 

The Batronix Professional Programmer Series offers an exceptionally flexible, simple to use and extremely fast set of eprom programmer that support a broad range of chips. With a height of only 2.5 cm the enclosures are very practical and are noted for their design and anodized die-cast aluminum construction. These programming devices are your first choice even in a harsh usage environment.

The exceptional flexibility is attained by providing all power requirements via the USB port. A power adapter or batteries are not required, since all programming voltages between 3 and 25 volts are provided internally by a voltage generator from the USB supply voltage. The chips are programmed at a high level of quality and reproducibility in the shortest time possible through the use of optimized algorithms and micro-controller managed programming times. All supported chips can be programmed directly in DIP/DIL packages and suitable adapters are available for specialized packages such as PLCC, SOP, TSOP and QFP.

BX32P Barlino II - New version available now!

With the BX32P Barlino II a new version of the popular programming device BX32P Barlino is available now. The following improvements were implemented compared with the first version:

  • Doubled firmware memory size: The BX32P Barlino II has enough place for future improvements and enlarged chip support.
  • Improve pin driving possibilities: The BX32P Barlino II can drive more pins with supplying and programming voltages as its predecessor.
  • Improved chip supply: The supply and programming voltages of the chips can now be set more accurately.
  • Supported Devices
  • very old NMOS EPROM (VPP > 15 V)
    OK
    OK
    OK
    OK
  • NMOS EPROM (VPP <= 15 V)
    OK
    OK
    OK
    OK
  • EPROM (27, 27C, 87, ...)
    OK
    OK
    OK
    OK
  • EEPROM (28C, 28HC, ...)
    OK
    OK
    OK
    OK
  • NV-RAM, Timekeeper (48, DS12, ...)
    OK
    OK
    OK
    OK
  • FLASH (27E, 27SF, 28F, 28SF, 29C, 29F, ...)
    OK
    OK
    OK
    OK
  • LPC, FWH, Firmware Hubs (39, 49, ...)
    OK
    OK
    OK
  • Serial EEPROM (24, 25, 45, 93, 95, ...)
    OK
    OK
    OK
  • 16 Bit EPROM, FLASH
    OK
    OK
  • PLD, SPLD, EPLD, GAL, PALCE
    OK
  • Microcontroller, MCU, PIC
    OK
  • NAND Flash
    OK
  • In-System Programming (ISP) via Batronix Universal ISP Adapter
    OK
  • Chip updates on customer request
    Free via software updates
  • Supported chip variants
    Last update (day.month.year)
    11,222
    10.06.2013
    22,856
    10.06.2013
    25,548
    10.06.2013
    0
    01.01.1601
  • Expected chip variants supported within the next 6-12 months
    > 12,000
    > 25,000
    > 30,000
    > 50,000
  • Complete chip support list
    BX32 chip list
    BX32P chip list
    BX40-II chip list
    BX48-II chip list

Software

Batronix Prog-Express SoftwareThe software and all updates and further versions are free, and the current version can be downloaded from www.Batronix.com at any time and used without an activation key. This allows the Batronix programmers to remain current even after several years. Support for further chips is added quickly and free of charge based on customer requests, as long as these chips can be supported by the hardware.

You will find the complete description at the Prog-Express page.

Video Presentation

We would like to show you how easy it is to use the Prog-Express software and the Batronix USB programming devices in a video presentation. Within 5 minutes you will learn how to program a chip with the data from a file, copy an existing chip, read a chip and program 20 chips in volume production mode.

Time: 5 minutes
File size: 5 MByte

Chip Volume Production

For volume production of chips, up to eight BX32, BX32P, BX40 or BX48 devices can be controlled simultaneously from one PC using the Prog-Express software. These programming devices are an alternative to gang-programming devices due to their low cost and extremely high programming speeds, and also offer greater flexibility.

Read more information about cluster programming and gang programming.

Quality "Made in Germany" with 5 years warranty!

5 Years WarrantyWe believe in the quality and advantages our products offer and invite you to buy our products risk free for 30 days today! You can test the product for 30 days and if you aren't 100% satisfied, you can send the device back and we will refund the product price!

All Batronix BX programming devices carry a warranty period of 5 years!

Translation offer

Translation offerSpecial offer: Help us translating the Prog-Express software from English or German into your native language and get a BX48 Batego II including worldwide shipping for free! Read more about this offer on this page.

  • Hardware Details
  • Interface
    USB 2.0 Full Speed 12 Mb/s
    USB 2.0 High Speed
    480 Mb/s
  • ZIF-socket
    32 Pin
    ECE
    32 Pin
    Aries
    "High Quality"
    40 Pin
    Aries
    "High Quality"
    48 Pin
    Aries
    "High Quality"
  • Pin driver
    Specialized for memory chips
    Universal
  • Low voltage support
    -
    downto 3 V
    downto 3 V
    downto 0.9 V
  • Dimensions [cm (inch)]
    9 x 8.5 x 2.5
    (3.5" x 3.3" x 1")
    13.7x8.5x2.5
    (5.4"x3.3"x1")
  • Weight without accessories / packaging
    155 g
    (0.34 lb)
    162 g
    (0.36 lb)
    167 g
    (0.37 lb)
    257 g
    (0.57 lb)
  • Weight with accessories / packaging
    349 g
    (0.77 lb)
    356 g
    (0.78 lb)
    361 g
    (0.80 lb)
    451 g
    (1.00 lb)
  • Warranty
    5 Years
  • Software Details
    Prog-Express
  • Process control
    OK
  • Project management
    OK
  • File formats
    Binary, Intel-Hex, Motorola S-Records, Straight-Hex, Tektronix, Extended Tektronix, Jedec
  • File format auto detection
    OK
  • Offset
    Data and chip offsets
  • Splitting
    Complete 16 and 32 Bit splitting functions
  • Serial number generator
    Very comfortable serial number generator with support for external serial number files.
  • Checksum calculation
    Checksum, MD5, SHA-1, EPT1 CRC16 and CRC32
  • Hex-Editor
    Very comfortable and feature rich
  • Software remote control
    Prog-Express can be remote controlled by other software with command line parameters and script files
  • Software updates
    ~2 weekly, free via download
  • Supported operation systems
    Windows 8 (32Bit + 64Bit), Windows 7 (32Bit+64Bit), Vista (32Bit + 64Bit), XP (32Bit + 64Bit), Linux (32Bit + 64Bit) and MAC OS X (32Bit + 64Bit)

    Additionally for BX32-BX40: Windows 2003 Server, 2000, ME, 98SE
  • Languages
    Arabic, Bulgarian, Chinese Simplified, Chinese Traditional (software only), Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Norwegian, Polish (software only), Portuguese, Romanian, Russian, Slovenian, Spanish, Swedish, Turkish

You will find further accessories like Adapter for special chip packages and ICs on separate pages.

Picture
Description
Price [EUR/USD]
Buy / Stock
Chip Tuner Module for BX32-BX40

Chip Tuner Module for BX32-BX40

Adds 2D and 3D data views and automatic engine map detection to Prog-Express.

EUR 167.23
USD 235.-

Without VAT, Plus Shipping Costs
 details
 

SMD-Vacuum pen with 3 suction cups

Ideally suited for handling SMD-components during assembly of circuit boards as well as for programming adapters. Thanks to the balloon-shaped handle, the vacuum is easily generated and allows a very precise handling of the components. The patented technique holding the vacuum constantly for longer periods prevents the components from dropping off. Delivery including 3 suction cups (1/8, 1/4 and 3/8 inch)

1...4 pcs:
€ 16.72 / $ 23.50
5 or more pcs:
€ 15.04 / $ 20.50

Without VAT, Plus Shipping Costs