Innovative Tools. Excellent Service.

EMC/EMI probes and accessory

Beehive, EMC/EMI probes and accessory

Rohde & Schwarz HM6050-2D

Rohde & Schwarz HM6050-2D

Be the first to write a review

Premium Line impedance stabilization network by Rohde & Schwarz with a frequency range from 9 kHz to 30 MHz (according to CISPR 16) with a maximum current of 16 A. The R&S® HM6050 can be remote controlled by using the RS232 interface.

3 years warranty.

Details Datasheet
€ 1,428.- incl. 19% VAT
€ 1,200.- net (VAT Details)
with FREE shipping within the EU!
Shipping costs outside EU

Beehive 101A EMC Probe Set

Be the first to write a review

The 101A probe set contains one of the 100A, B, C and D probes each. The three loop probes are sensitive to magnetic fields. They have different diameters, so that the user can select the optimal probe for the frequency of interest. The 100D stub probe is sensitive to electric fields, and offers the best spatial resolution of all.
No adapters or cables included.

2 years warranty.

Datasheet
€ 320.11 incl. 19% VAT
€ 269.- net (VAT Details)
with FREE shipping within the EU!
Shipping costs outside EU

Beehive 100A medium H-Field Probe

Be the first to write a review

The 100A is a small, handheld magnetic field probe ideal for locating the sources of EMC emissions. Its integrated electrostatic shield offers good common-mode rejection, and its fine spatial resolution makes it easy to track a source of emissions down to the offending component.

2 years warranty.

Datasheet

Beehive 100B small H-Field Probe

Be the first to write a review

The 100B magnetic field probe has the smallest loop of any probe in the series. It offers the best spatial resolution and high-frequency response of the magnetic field probes, but has lower sensitivity than the 100A or 100C.

2 years warranty.

Datasheet

Beehive 100C large H-Field Probe

Be the first to write a review

The 100C magnetic field probe has the largest loop of any probe in the series. It has the best sensitivity of the magnetic field probes. Because the large size of the loop, its high-frequency response and spatial resolution are not as good as the 100A and 100B.

2 years warranty.

Datasheet

Beehive 100D E-Field Probe

Be the first to write a review

The 100D is an electric field probe, unlike the 100A/B/C. It has the best spatial resolution of all the probes. However, because it is an electric field probe, it does not offer the common mode rejection that the magnetic field probes have.

2 years warranty.

Datasheet

Beehive 110A Probe Cable

Be the first to write a review

The 110A probe cable is designed to connect the 100 series probes to the 150A amplifier or other instruments. This double-shielded cable has good RF performance from DC to 6 GHz.

Its narrow diameter gives the 110A cable high flexibility, making it convenient and kink-free when using the probes manually.

One end of the cable has a female SMB connector to connect to the probes, and the other end is male SMA. This allows it to connect directly to the 150A amplifier with no adapters.

2 years warranty.

Beehive 112A Probe Cable

Be the first to write a review

The 112A probe cable is designed to connect the 100 series probes to spectrum analyzer or other instruments. This double-shielded cable has good RF performance from DC to 6 GHz.

Its narrow diameter gives the 112A cable high flexibility, making it convenient and kink-free when using the probes manually.

One end of the cable has a female SMB connector to connect to the probes, and the other end is male N Type. This allows it to connect directly to the Spectrumanalyzer with no adapters.

2 years warranty.

Beehive 150A Probe Amplifier

Be the first to write a review

The 150A EMC probe amplifier is a low-noise, wide-bandwidth amplifier designed for use with the 100 series EMC probes. It features a gain of over 30 dB and a frequency response of 100 kHz to 6 GHz.

Its high gain and low noise improve the system sensitivity dramatically. This higher sensitivity allows the user to widen the spectrum analyzer resolution bandwidth, resulting in faster sweeps and measurements. Depending on the model of spectrum analyzer used, sensitivity can be improved by 20 to 30 dB.

This improved sensitivity can improve measurement speed by a factor of 10,000 or more.

Delivery including 150A Probe Amplifier, power adapter (100 - 240 V, 50 / 60 Hz) and power cord.

2 years warranty.

Datasheet
€ 558.11 incl. 19% VAT
€ 469.- net (VAT Details)
with FREE shipping within the EU!
Shipping costs outside EU

Cable, SMA plug (male) to N plug (male), 30 cm

Be the first to write a review

Used e.g. to connect the Beehive 150A Probe Amplifier to a spectrum analyzer. Cable length 30 cm.

2 years warranty.

Adapter SMB plug (female) to BNC jack (female)

Be the first to write a review

Adapter from SMB Plug (female) to BNC Plug (female) with a very good performance from DC up to 1 GHz. At frequencies above 1 GHz, we recommend that our customers avoid using BNC adapters and cables, as their return loss and repeatability suffer. At these frequencies, the SMA Probe Adapter is a better choice.

2 years warranty.

Adapter SMB plug (female) to SMA jack (female)

Be the first to write a review

One Adapter from SMB Plug (female) to SMA jack (female) with a very good performance from DC up to 6 GHz.

2 years warranty.

Adapter BNC plug (male) to SMA jack (female)

Be the first to write a review

Adapter from BNC plug (male) to SMA jack (female).

2 years warranty.

Adapter N-plug (male) to BNC jack (female)

Be the first to write a review

Adapter from N-plug (male) to BNC jack (female). Used e.g. to connect a BNC cable to a spectrum analyzer.

2 years warranty.

Adapter N-plug (male) to SMA jack (female)

Be the first to write a review

Adapter from N-plug (male) to SMA jack (female). Used e.g. to connect the 110A probe cable to a spectrum analyzer.

2 years warranty.