High voltage differential probe
RP1000D series high voltage differential probe can convert high differential input voltage to low voltage and display the waveform on oscilloscope. Its working frequency is up to 25 MHz (RP1025D), 50 MHz (RP1050D) and 100 MHz (RP1100D) and it is rather suitable for large electricity test and R&D. RP1000D series high voltage differential probe is applicable to general purpose oscilloscope and the labeled attenuation ratios are those when the input impedance of the oscilloscope is 1 MΩ. The attenuation ratios will double when the input impedance of the oscilloscope is 50 Ω.
| Bandwith | 100 MHz bei TF 200:1, 500:1, 1000:1 50 MHz bei TF 100:1 |
| Rise Time | 3.5 ns at 200:1, 500:1, 1000:1 7 ns at 100:1 |
| Attenuation | 100 : 1 200 : 1 500 : 1 1000 : 1 |
| Gain Accuracy | ±2 % |
| Max. Input (earthed) | CAT III 6500 V |
| Common Mode Rejection Ratio | 60 Hz: >80 dB 100 Hz: >60 dB 1 MHz: >50 dB |
| Input Impedance | 100 MΩ 1.2 pF （differential） 50 MΩ 2.3 pF （Single-ended and to ground） |
| Output | ≤ ±8.0 V |
| Power | 0.4 W |
| Dmensions | 24 cm x 8.5 cm x 2.4 cm |
| Cable Length | 100 cm (Dual-BNC) 60 cm (Dual-banana plug silicon cable) |
Downloads
Datasheet
Rigol RP1000D Datasheet
Language: English
File Size: 613.35 KiB
Release Date: 27.04.2015
Data sheet and manual combo