TEKBOX, EMCview (Software)

Description

The Tekbox EMC compliance software EMCview for PCs is a user-friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs, RF current probes, measurement antennas and TEM Cells.

A built-in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, filters and any other component in the signal chain.

There is no need for a time-consuming setup. The SW is ready for measurements straight after installation. All emission related standards and a few automotive manufacturer standards are pre-configured in corresponding project files. The project files take care of all necessary settings to conduct standard compliant measurements. Besides using pre-configured projects, the user can easily create his own projects using a built in editor or any simple text editor.

The graph supports two complete measurement runs such as for example Average / Quasi-Peak or Peak / Quasi Peak and in addition a fast Quasi-Peak scan of critical peaks. Graphs can be saved and overlayed with newer measurements to track and document design modifications.

Furthermore, EMCview together with our GPS receiver can be used to carry out RF-coverage measurements. An export feature creates KML files which link the result to google maps.

Immunity testing is supported with dedicated menus, controlling the tracking generator of the spectrum analyzer.

EMCview PRO, offers real-time measurement support for spectrum analyzers with real-time capability. Furthermore, EMCview PRO offers advanced conducted immunity testing features for spectrum analyzers with tracking generators. The customer can select between a standard EMCview license or EMCview PRO. Users with a standard EMCview license have the option to upgrade to EMCview Pro.

There are two license options:

Analyzer-coupled – the license is coupled to the serial number of the spectrum analyzer. It can be installed on any number of PCs, but it can only control one dedicated spectrum analyzer
PC-coupled: the license is coupled to the Host ID of the PC. It can control any of the supported spectrum analyzer models, but it can only be installed on one dedicated PC.

Please specify the desired option in the comment field during the order process or in an e-mail to to service@batronix.com and we will send you the licence file within one working day.

Software limitation without a license: the measurement is limited to the frequency range below 10MHz

EMCview currently supports the following spectrum analyzers

Rigol (DSA and RSA)
Siglent (SSA/SSA plus/SSA -R and SVA) Siglent EU, Siglent USA
R&S (FPC and FPH)
OWON XSA, HSA and NSA
Teledyne Test Tools T3SA series
BK Precision 2683 series
ComPower SPA-900TG series
Multicomp MP700xyz series
TheEMCShop ESA series
UNI-T UTS series

The spectrum analyzer should be equipped with the EMI option.

Features

numerous pre-configured project files for CISPR-xx (EN550xx) emission measurements
graph supports two complete measurement runs, same as in test house
fast Quasi-Peak scan of critical peaks, immune to frequency drift of the selected peaks
configurable limit lines and segment files
configurable correction files for cable, LISN, amplifier, antenna etc.
configurable margins for the identification and selection of critical peaks
supports import and overlaying of reference measurements for comparison purpose
linear or logarithmic frequency axis
automatic creation of test reports
many import/export-functions

Applications

in house measurement of EMC behavior during product design phase
EMC training in lab, school and university
pre-compliance test of products before submitting it to the test house
test cost reduction
reduced time to market

Exemplary test arrangements

Conducted emission testing using LISN

Conducted emission testing using 2 LISN

Conducted emission testing using a RF current monitoring Probe

Radiated emission testing using a measurement antenna

Radiated emission testing using a TEM cell

Immunity testing using a TEM-cell

Immunity testing using near field probes

EN 61000-4-6 calibration set up using EMCview PRO

EN 61000-4-6 immunity test set up using EMCview PRO

EN 61000-4-6 300 Ohm loop BCI calibration set up using EMCview PRO

EN 61000-4-6 immunity test set up using a BCI probe using EMCview PRO

ISO 11452-4 Conducted immunity measurement using EMCview PRO

Most Common Standards/Norms

CISPR 11	DIN EN 55011	Standard for industrial, scientific und medical radio equipment
CISPR 13	DIN EN 55013	Standard for audio and television receivers
CISPR 14	DIN EN 55014	Standard for household appliances
CISPR 15	DIN EN 55015	Standard for light sources and similar devices
CISPR 22	DIN EN 55022	Standard for IT equipment
CISPR 25	DIN EN 55025	Standard for electrical or electronical components in vehicles and boats
CISPR 32	DIN EN 55032	Standard for multimedia devices