Accessories RTM3004
20 of 20 Article
The largest display 25.7 cm (10.1") with the highest resolution of 1280 × 800 pixel in its class, a capacitive touchscreen to quickly navigate in pop-up menus and a touch function to easily adjust scaling, to zoom in or to move a waveform – works just like your smartphone.
The 10-bit A/D converter yields up to a four-fold improvement compared to conventional 8-bit A/D converters. You get sharper waveforms with more signal details. 40 Msample memory depth (400 Msample fast segmented memory) is available on each channel if all channels are active. When interleaved, 80 Msample
are available. That is 10 times more than comparable oscilloscopes offer. This captures longer signal sequences for more analysis results.
The R&S® RTM-BNDL gives users more than just an oscilloscope. It also has the capabilities for a logic analyzer, protocol analyzer, waveform and pattern generator and digital voltmeter.
Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient – and satisfies the all-important rule of investment protection at a very attractive price.
| Features | RTM3002 | RTM3004 |
|---|---|---|
| Channel | 2 | 4 |
| Bandwidth | 100 MHz-1 GHz | 100 MHz-1 GHz |
| Sample Rate | 2.5 GSa/s per channel 5 GSa/s interleaved | 1.25 GSa/s per channel 2x 2.5 GSa/s interleaved |
| Waveform Capture Rate | 64000 wfms/s | 64000 wfms/s |
| Memory Depth | 40 Mpts per channel 80 Mpts interleaved | 40 Mpts per channel 2x 80 Mpts interleaved |
| Waveform / Pattern Generator Option | ||
| Logic Analyzer Option |
You will find the specifications of the RTM3000 series here.
Overview
| RTM3002 Bandwidth + MSO Sets (2 Channels) | Bandwidth | Logic Analyzer |
|---|---|---|
| RTM3002 | 100 MHz (upgradable) | Option |
| RTM3K-02M | 100 MHz (upgradable) | |
| RTM3K-22 | 200 MHz (upgradable) | Option |
| RTM3K-22M | 200 MHz (upgradable) | |
| RTM3K-32 | 350 MHz (upgradable) | Option |
| RTM3K-32M | 350 MHz (upgradable) | |
| RTM3K-52 | 500 MHz (upgradable) | Option |
| RTM3K-52M | 500 MHz (upgradable) | |
| RTM3K-102 | 1 GHz | Option |
| RTM3K-102M | 1 GHz |
| RTM3004 Bandwidth + MSO Sets (4 Channels) | Bandwidth | Logic Analyser |
|---|---|---|
| RTM3004 | 100 MHz (upgradable) | Option |
| RTM3K-04M | 100 MHz (upgradable) | |
| RTM3K-24 | 200 MHz (upgradable) | Option |
| RTM3K-24M | 200 MHz (upgradable) | |
| RTM3K-34 | 350 MHz (upgradable) | Option |
| RTM3K-34M | 350 MHz (upgradable) | |
| RTM3K-54 | 500 MHz (upgradable) | Option |
| RTM3K-54M | 500 MHz (upgradable) | |
| RTM3K-104 | 1 GHz | Option |
| RTM3K-104M | 1 GHz |
Special Features
Oscilloscope
With a sampling rate of up to 5 Gsample/s and a memory depth of up to 80 Msample, the R&S® RTM-BNDL oscilloscope excels in its class. A waveform update rate of more than 64 000 waveforms/s ensures a responsive instrument that reliably catches signal faults. Included standard tools provide quick results, e.g. QuickMeas, mask tests, FFT, math, cursors and automatic measurements, mincluding statistics.
Logic analyzer
The R&S®RTM-B1 option turns every R&S® RTM-BNDL into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and timecorrelated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.
Protocol analyzer
Protocols such as I2C, SPI and CAN/LIN frequently transfer control messages between integrated circuits. The R&S® RTM-BNDL has versatile options for protocol-specific triggering and decoding of serial interfaces. Selective acquisition and analysis of relevant events and data is possible. With the hardware-based implementation, smooth operation and a high update rate is ensured even for long acquisitions. This is advantageous, for example, to capture multiple packetized serial bus signals.
Waveform and pattern generator
The integrated R&S®RTM-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Before playing signals back, the user can preview them to quickly check signal correctness. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.
Digital voltmeter
The R&S® RTM-BNDL features a three-digit voltmeter (DVM) and sixdigit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DCRMS and ACRMS – included in scope of delivery.
Frequency analysis mode
Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S® RTM-BNDL is activated with the push on a button and by just entering center frequency and span. Due to the high-performance FFT functionality of the R&S® RTM-BNDL oscilloscopes, signals can be analyzed with up to 128k point. Other practical tools include cursor measurements and autoset in frequency domain.
Mask test mode
Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S® RTM-BNDL. This pulse output can be used to trigger actions in the measurement setup.
History and segmented memory mode
The R&S®RTM-K15 history function option increases the memory from 40 Msample to 400 Msample. Users scroll through past acquisitions and analyze the data using all of the oscilloscope tools, e.g. protocol decode and logic channels. Serial protocol and pulse sequences are recorded practically without interruptions.
Spectrum Analysis and Spectrogram
A spectrogram displays the spectrum of frequencies as they vary over time. For easy interpretation, the magnitude can be color-coded. Thanks to the high FFT rate, even fast frequency changes can be displayed. When used in combination with the R&S®RTM-K15 history and segmented memory option, the spectrogram marker shows the time of the acquisition and makes it possible to load the corresponding time and frequency waveforms onto the screen. All R&S®RTM3000 tools can be used to analyze the loaded waveforms.
Power Analysis
Accurate voltage and current probes with a suitable measurement range are critical for power measurements. Rohde & Schwarz offers a complete probe portfolio for different power measurement applications – ranging from μA to kA and from μV to kV.R&S®RTM3000 - 10 s boot up and ready to measure
The R&S® RTM3000 boots in just 10 seconds and is ready to measure.
R&S® RTM3000 – 40 Msample standard and 80 Msample interleaved
The R&S® RTM3000 offers a class-leading memory depth: 40 Msample per channel are available, even 80 Msample in interleaved mode.
R&S® RTM3000 - Logic analysis
The R&S® RTM-B1 option turns every R&S® RTM3000 into an intuitive-to-use MSO with 16 additional digital channels.
R&S®RTM3000 - Probe Portfolio Support
A complete portfolio of high-quality passive and active probes covers all measurement tasks.
R&S® RTM3000 - Spectrum analysis and spectogram
Difficult-to- find faults often result from the interaction between time and frequency signal. The R&S®RTM-K18 spectrum analysis and spectogram option makes it easy to find such errors quickly. Like on a spectrum analyzer, parameters such as center frequency and resolution bandwidth can be adapted to the specific mesaurement task and the oscilloscope automatically selects the optimum time domain settings.
R&S® RTM3000 - Vertical Zoom
The R&S® RTM3000 features a vertical zoom. Vertical zoom is an easier way to quickly magnify the portion of the signal you want to see, and retain measurement accuracy.
R&S® RTM3000 - Power and harmonics analysis
The R&S® RTM3000 features analysis of input and output as well as transfer function of switched-mode power supplies. Furthermore it offers the ability to analyse harmonic current in line with conventional EN, MIL and RTCA standards.
R&S® RTM3000 - quick access
The R&S® RTM3000 features a quick access menu. Quick access lets you drag any manual item quickly and place it where you want.
Downloads
Datasheet
RTM3000 Datasheet
Language: English
File Size: 1.06 MiB
Release Date: 01.05.2021
RTM3000 Product Brochure
Language: English
File Size: 10.16 MiB
Release Date: 27.12.2018
Manual
RTM3000 Manual
Language: English
Version: 08
File Size: 16.47 MiB
Release Date: 27.12.2018
RTM3000 Manual
Language: German
Version: 03
File Size: 15.46 MiB
Release Date: 01.11.2021
RTM3000 Quick Guide
Language: English
File Size: 3.27 MiB
Release Date: 27.12.2018
Software
RSCommander Manual
Language: English
File Size: 2.11 MiB
Release Date: 27.12.2018
RSCommander Software
Language: English
File Size: 54.60 MiB
Release Date: 27.12.2018