Pico Technology PicoLog CM3 data logger with 3 current clamps (PP803)

Be the first to write a review

Data logger for up to 3 current clamps, 24 bit ADC resolution, 720 ms measuring time per active channel.

Delivery includes three 200 A current probes (TA138).

5 years warranty

No.: PP803

with FREE shipping within the EU!
Shipping costs outside EU

in Stock

€ 569.- net (VAT Details)

€ 677.11 incl. 19% VAT

Description

High-precision data logger

The PicoLog CM3 is a three-channel data logger that uses industry-standard current clamps. Simply connect it to your PC via USB or Ethernet to your PC, run the supplied software and you're ready to monitor and record current for a variety of applications. The supplied TA138 (x3) is a current clamp for AC-only current measurements. Its single range is capable of measurements from 0.1 A to 200 A. Ideally suited for use with the PicoLog CM3. Fitted with 4 mm (banana) plug type connectors.

PicoLog 6 software, the unit can be used with any laptop or PC running Windows, macOS or Linux. Power is supplied and the connection to a PC or laptop is made via a USB 1.1, USB 2.0 or 3.0 connection. With our PicoLog data software, you can record, monitor and analyse the collected data and even export it to third-party applications such as Microsoft Excel. The PicoLog software is free to download from www.picotech.com/downloads and can be used with any laptop or PC running Windows, macOS or Linux.

Special features

Suitable for single-phase or three-phase alternating currents
Non-invasive measurement
High resolution and accuracy
No power supply required
USB and Ethernet interfaces
Operation of multiple units on a single PC

Functional
Number of channels	3
Maximum number of units	20
Range (voltage input)	0 to 1 V AC true RMS, 20 Hz to 1 kHz
Accuracy (voltage input)
< 200 mV RMS	±1%
< 1 V RMS	±2.5%
RMS noise	60 µV
Resolution	24 bits
Conversion time per enabled channel	720 ms
Input connectors	4 mm sockets
Input impedance	> 1 MΩ, AC coupled
Overvoltage protection	±30 V DC

An expandable data acquisition system with multiple channels

The PicoLog CM3 Current Data Logger is a compact, easy-to-use data logger for measuring the current consumption of buildings and machinery.

Typical applications

Mains current monitoring
Three-phase load balancing
Long-term energy use recording
Energy and cost saving / ISO14001 monitoring

Flexible, expandable software included

Your PicoLog CM3 Current Data Logger is supplied with PicoLog 6 data logging software, available for Windows, macOS and Linux. With PicoLog 6 you can collect almost unlimited datasets, analyze them and then display the results in spreadsheet and graphical formats.

PicoLog 6 can record data from multiple PicoLog data loggers at the same time. This allows you to collect up to 60 channels of current. You can even mix and match different PicoLog loggers to record a mix of current, temperature, voltage and other signals.

USB or Ethernet connection for local or remote logging

With both USB and Ethernet interfaces your PicoLog CM3 can be used in a variety of situations. If you need a portable instrument that can be used at various locations and is fast to set up and use, simply connect your laptop to the PicoLog CM3 by USB. No external power supply is required as the CM3 is powered from the USB port.

Need to monitor a situation over a period of hours or days, or from a remote location? Plug your PicoLog CM3 into a spare port on your network and then access it remotely either from your LAN or over the internet. When using Ethernet the CM3 can be powered either by Power over Ethernet (PoE) or by using the USB connection just for power. Please note that PicoLog 6 data logging software only supports Ethernet connection in Windows.

Using more devices

The CM3 is capable of measuring up to 3 channels at once. Need more channels? No problem. Using PicoLog you can connect up to 20 CM3s to one PC – giving you a potential 60-channel MC3 data logger. Alternatively, you can use your CM3 logger with up to 19 other Pico data loggers, such as the PicoLog 1000 multichannel data logger, to create your own custom data acquisition system.