Name: Pico Technology PicoLog 1216 USB data logger (PP544)
Brand: Pico Technology
Availability: InStock

Description

Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multichannel DAQ Series features independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a 12-bit ADC resolution.

Special features

16 input channels per data logger
12 bit ADC resolution
4 output channels per data logger
1 pulse width modulation output
Sampling rate up to 1 MSa/s
Connection and power supply via USB interface
Data logger software and software programming interface included in delivery

Model	PicoLog 1216
Input
Analog inputs	16
Resolution	12 bits
Accuracy	0.5 % of full scale
Maximum sampling rates:
PicoScope	1 MSa/s[1]
PicoLog	1 kSa/s[2]
PicoSDK (block mode)	1 MSa/s[1]
PicoSDK (streaming)	100 kSa/s[1]
Capture memory
PicoScope (and PicoSDK block mode)
Sample rates over 100 kSa/s:	8000 samples [1]
Lower sample rates:	1 million samples [1]
PicoLog (and PicoSDK streaming mode):	Up to available PC storage
Analog bandwidth (–3 dB)	DC to 70 kHz
Input type	Single-ended, unipolar
Input voltage range	0 to +2.5 V
Overvoltage protection	±30 V to ground
Input coupling	DC
Input impedance	1 MΩ
Outputs
Digital outputs (D0…D3)	4[3]
Digital outputs (PWM)	1
Period	100 µs to 1800 µs
Duty cycle	Adjustable from 0% to 100% in 1% steps
Digital outputs (all)
Logic low voltage	100 mV (typical)
Logic high voltage	3.3 V
Current limit	1 kΩ resistors in series with outputs

[1]Shared between active channels.
[2]Per active channel
[3]Except in ADC-11 compatibility mode. Please see the PicoLog 1000 Series User’s Guide.

An expandable data acquisition system with multiple channels

The high-performance PicoLog 1216 model has 16 input channels and a 12-bit resolution. You need more channels? No problem. With the new PicoLog software allows you to connect up to 20 Pico data loggers to a PC, creating a potential - to create a potential 320-channel PicoLog 1000 Series data logging system. data logger PicoLog 1000 can be used in conjunction with other devices such as the TC-08 thermocouple data logger.

External terminal board

The external terminal board, which plugs in to the 25-way connector on the logger, has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can ﬁt resistors to offset and extend the input ranges of the logger.

Intuitive devices and channels

From the Devices view, you can easily set up a multi-channel logging system with the option to use up to 20 different Pico data loggers at the same time. PicoLog shows you a picture of each connected device. This allows you to quickly and easily activate and deactivate channels and set their properties. The picture shows the device setup for a PicoLog 1216 and a TC-08 temperature data logger.

PicoLog Software

PicoLog is a complete data acquisition software package for the PicoLog 1000 Series data logger, and is fully compatible with Windows, macOS and Linux. With its clear and user- friendly layout, ideal for use with a mouse or a touchscreen, PicoLog allows you to set up the logger and start recording with just a few clicks of the mouse, whatever your level of data logging experience. Set up simple or advanced acquisitions quickly, and record, view and analyze your data with ease.