LCR Research LCR Pro

Be the first to write a review

LCR meter for measurements from 20 mΩ to 10 MΩ, 0.1 pF to 10 mF and 10 nH to 1 H. Very high accuracy up to 0.1% (R) or 0.2% (L & C), test frequencies from 100 Hz to 100 kHz, test voltages from 0.2 to 1 Vrms. With PC software (LCR link required) and OLED display.

3 years warranty

Nr: PR1-001UT

with FREE shipping within the EU!
Shipping costs outside EU

in Stock

€ 365.- net (VAT Details)

€ 434.35 incl. 19% VAT

Description

The LCR meters from LCR Research are compact, precise and incredibly practical to use. Components can be gripped, placed and measured at the same time and even on PCBs the re-measurement of assembled components is easily possible.

Due to the tweezers design, these LCR meters have several advantages over classic LCR meters with "flying" measuring cables. Due to the short and defined connections, the tweezers ensure extremely low noise, a constant measurement setup and thus precise measurements and excellent sensitivity even for small component values in the mΩ, nH and pF range.

With the auto measurement function, components (LCR) can be detected and measured during contacting. In addition to the primary measurement function (e.g. the capacitance value of a capacitor), the ESR is also measured and displayed.

Overview

Model	LCR Elite2	LCR Pro1	LCR Pro1 Plus
Basic accuracy (details in manual)	R: 0.2% L: 0.4% C: 0.2%	R: 0.1% L: 0.2% C: 0.2%	R: 0.1% L: 0.2% C: 0.2%
Measurement range	R: 20 mΩ to 10 MΩ C: 0.1 pF to 5 mF L: 0.1 uH to 1 H	R: 20 mΩ to 10 MΩ C: 0.1 pF to 10 mF L: 10 nH to 1 H	R: 20 mΩ to 10 MΩ C: 0.1 pF to 10 mF L: 10 nH to 1 H
Test Frequency	100 Hz - 10 kHz	100 Hz - 100 kHz	100 Hz - 100 kHz
Test Voltage	0.5 Vrms	0.2 Vrms, 0.5 Vrms, 1.0 Vrms	0.2 Vrms, 0.5 Vrms, 1.0 Vrms
Supported Measurements	Resistance (R) Capacitance (C) Inductance (L) Dissipation Factor (D) Quality Factor (Q) Equivalent Series Resistance (ESR)	Resistance (R) Capacitance (C) Inductance (L) Impedance (Z) Dissipation Factor (D) Quality Factor (Q) Phase Angle (Ө) Equivalent Series Resistance (ESR) Direct Current Resistance (DCR) Diode Check Continuity Sorting Recording	Resistance (R) Capacitance (C) Inductance (L) Impedance (Z) Dissipation Factor (D) Quality Factor (Q) Phase Angle (Ө) Equivalent Series Resistance (ESR) Direct Current Resistance (DCR) Diode Check LED Testing Continuity Sorting Recording
LED Testing
PC Connectivity		(LCR Link1 Required)	(LCR Link1 Required)
Over Voltage Protection (between test tips)
Display	OLED 0.91″, 128 x 32 Resolution	OLED 0.96″, 128 x 64 Resolution	OLED 0.96″, 128 x 64 Resolution
Battery	3.7V LiPO, 180mAH, Rechargeable	3.7V LiPO, 180mAH, Rechargeable	3.7V LiPO, 150mAH, Rechargeable
SMD Test Probes	Gold Plated (Regular)	Gold Plated (Ultra-Precise)	Gold Plated (Ultra-Precise)

You will find the specifications of the LCR Pro1(Plus) here.

Key features

Easy operation - one hand use with shortcuts
High accuracy – R: 0.2%, L: 0.4%, C: 0.2%
5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
3 test voltages – 0.2Vrms, 0.5Vrms, 1.0Vrms
Wide measurement range – R: 20mΩ to 10MΩ, C: 0.1pF to 10mF, L: 10nH to 1HH
Fully auto/manual selection
Small size – 151 x 19 x 14.5mm
Bright OLED display – 0.96″, 128 x 64 resolution
Ultra precise gold plated tips
Rechargeable LiPO battery with USB charging
PC remote control for data logging and programming
Multiple functions – R, L, C, Z, ESR, DCR, D, Q, θ, diode, sorting, recording and continuity

A Breakthrough in Accuracy

LCR Pro1 delivers high accuracy once found only in high-end desktop LCR meters. It provides basic accuracy 0.1% for resistance and 0.2% for capacitance and inductance with 5-digit resolution. Each device is fully calibrated during production and shipped with NIST (National Institute of Standards and Technology) traceable calibration certificate.

The test frequencies can be selected from 100Hz to 100kHz. 100kHz is ideal for measuring small inductance under 1uH. The test voltage can be selected from 0.2Vrms to 1.0Vrms. 1.0Vrms allows precision measurements of ceramic capacitors with high dielectric constant (K), such as X5R type. 0.2Vrms is specially designed for in-circuit debugging because it is low enough to prevent the silicon chips from being active during measurement.

Ultra-Precise Tips

The redesigned gold-plated tips are more precise than ever. You can use them to pick up and measure SMD components quickly and reliably, even for parts down to sizes of 01005. Thanks to the precise tips, you can easily reach the component under test without touching the adjacent components during in-circuit troubleshooting even in a very crowded area.

LED testing function (plus version)

LCR Pro1 Plus are the best tweezers-style LCR meter we have ever made. It has all the great features that come with the LCR Pro1, plus an additional LED testing function and excellent sensitivity to measure very small inductance down to just several nHs thanks to the ultra low noise design and 100kHz testing frequency.

In LED testing, LCR Pro1 Plus lights up the LED and displays its electrical parameters, such as polarity, forward voltage and forward current. When testing bi-directional LEDs, the electrical parameters will be displayed in each direction.

User friendly interface

LCR Pro1 comes with a 0.96″ OLED display, doubling the size of its predecessor’s 0.91″ display. The pixels are doubled as well from 12832 to 12864. Larger font and more information can be displayed for you to read the results and navigate the menu more conveniently.

LCR Pro1 is full of handy shortcuts to help you switch all kinds of parameters faster and easier. During measurements, you can quickly select different settings by single clicking, double clicking or holding the navigation button.