Name: R&S® LCX100
Brand: Rohde & Schwarz
Availability: BackOrder

Model

R&S LCX100

R&S LCX200

Test signal frequenzy

DC, 4 Hz to 300 kHz

DC, 4 Hz to 10 MHz (Option)

Test signal voltage

100 mV to 10 V

< 1 MHz: 100 mV to 10 V,

1 MHz: 100 mV to 2 V

Common features

Model

R&S LCX100 / LCX200

Basic accuracy (impedance measurements)

0.05 %

Measurement range

100 mΩ to 100 MΩ

DC bias voltage (internal)

0 V to +10 V

DC bias current (internal)

0 mA to 200 mA

External DC bias voltage, input

0 V to +40 V

Source impedance

100 Ω, 10 Ω

Supported Measurements

Cp Capacitance value measured with parallel-equivalent circuit model
Cs Capacitance value measured with series-equivalent circuit model
Lp Inductance value measured with parallel-equivalent circuit model
Ls Inductance value measured with series-equivalent circuit model
D Dissipation factor
Q Quality factor (inverse of D)
G Equivalent parallel conductance measured with parallel-equivalent circuit model
Rp Equivalent parallel resistance measured with parallel-equivalent circuit
Rs Equivalent series resistance measured with series-equivalent circuit model
Rdc Direct current resistance
R Resistance
X Reactance
Z Impedance
Y Admittance
Θd Phase angle of impedance/admittance (degree)
Θr Phase angle of impedance/admittance (radian)
B Susceptance
Mutual inductance
N Turns ratio

You will find the specifications of the LCX here.

Special Features

Display

In addition to a variety of impedance measurements the two R&S®LCX LCR meters offer the possibility to measure resistors for DC voltage and transformers. and transformers. The display can simultaneously show up to four measurement parameters simultaneously.

Test signals

Test signals and measurement functions can be set as required

Measurement functions

Measuring functions can be selected in pairs

Waveform and pattern generator

Another option for the R&S®LCX100//LCX200 measuring instruments is a set of digital inputs/outputs. This contains one trigger input (designed as a BNC connector) and eight data lines for the so-called binning function. For this purpose, the determined measurement results can be divided into up to eight tolerance ranges and the measured components can be divided according to their values (controlled via these digital lines) into sorting bins installed by the customer. The hardware of the R&S®LCX-K107 option is already installed; the function can be enabled via a key code.

High resolution touchscreen

The large capacitive touchscreen is the central element in the element in the operation of the R&S®LCX measuring instruments. By briefly touching a numerical value, a virtual keyboard appears virtual keyboard appears on which the desired value can be entered. entered. Alternatively, voltage, current and frequency values can be set using the rotary knob. All less frequently used functions are called up and are called up and operated via menus. With its high resolution, the display sets new standards for LCR meters. Large, high-contrast fields for all measured values allow good readability readability, even from a distance. Furthermore additional information such as setting values or or statistical values. The user is informed about the status of special functions is indicated to the user by corresponding icons inform the user about the status of

Graphical representation of measurements

The large display can also be used for graphical representations. Up to four measurement functions can be selected and displayed above the time axis. Minimum and maximum values can also be recorded.

Saving and loading device settings

Frequently used settings can be easily saved using the Save and Recall functions. Three unit settings are directly accessible via the touchscreen. Additional settings can be saved as desired.

Remote control of the unit functions

For use in test systems, the R&S®LCX instruments can be controlled remotely. The following interfaces are available: ► USB and LAN (Ethernet) interfaces are fitted as standard; all instrument parameters can be remotely controlled via these. ► IEEE-488 (GPIB) interface (R&S®NG-B105 option): The R&S®NG-B105 interface with IEEE-488 (GPIB) connection can also be retrofitted by the user.

Tailored for use in laboratories and system racks

The R&S®LCX measuring instruments are specialists for demanding applications. They are used in research and development laboratories and are integrated in production test systems. With the R&S®ZZA-GE23 rack adapter, the instruments can be installed in 19" racks. The compact design is an important criterion for use in test systems.

Test adapter

LCR meters from Rohde & Schwarz can be used to measure a wide variety of components. Depending on the design, suitable measuring adapters are used for this purpose. The measuring principle of the self-calibrating measuring bridge (Kelvin circuit) requires that the respective pair of measuring leads to the component to be measured (four-wire measurement). All measuring adapters ensure this and are thus an essential component for accurate measurements and the minimisation of parasitic impedances. The adapters can be conveniently connected to the basic unit with the locking levers.

Accessories, Rohde & Schwarz LCX

12 of 12 Article

Sorting

Be the first to write a review
LCX-K106, R&S, Advanced analysis functions for R&S® LCX: dynamic impedance measurements (sweep) and graphical view

Be the first to write a review
LCX-K107, R&S, Digital I/O ports and binning function for R&S® LCX: external trigger and functionality to sort components

Be the first to write a review
LCX-K108, R&S, Extended bias functions for R&S® LCX: internal current bias, external voltage bias up to 40 V

Be the first to write a review
LCR Meter R&S LCX200 Frequency extension to 1 MHz

Be the first to write a review
LCR Meter R&S LCX200 Frequency extension to 10 MHz

LCX-Z1 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
Test fixture for axial/radial lead type incl. shorting plate, device for R&S® LCX meters

LCX-Z2 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
Kelvin clip lead for R&S® LCX meters

LCX-Z3 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
Test fixture for SMD components for R&S® LCX meters

LCX-Z4 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
Test tweezers for SMD components for R&S® LCX meters

LCX-Z5 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
Transformer test cables for R&S® LCX meters

LCX-Z11 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
BNC extension, 1 m, for R&S®LCX meters

ZZA-GE23 Measurement Accessory by Rohde & Schwarz — Be the first to write a review
19" rack kit, 2HU, for R&S®NGP800 power supplies and R&S®LCX LCR meter

Downloads

Datasheet

Guide

Model	R&S LCX100 / LCX200
Basic accuracy (impedance measurements)	0.05 %
Measurement range	100 mΩ to 100 MΩ
DC bias voltage (internal)	0 V to +10 V
DC bias current (internal)	0 mA to 200 mA
External DC bias voltage, input	0 V to +40 V
Source impedance	100 Ω, 10 Ω
Supported Measurements	Cp Capacitance value measured with parallel-equivalent circuit model Cs Capacitance value measured with series-equivalent circuit model Lp Inductance value measured with parallel-equivalent circuit model Ls Inductance value measured with series-equivalent circuit model D Dissipation factor Q Quality factor (inverse of D) G Equivalent parallel conductance measured with parallel-equivalent circuit model Rp Equivalent parallel resistance measured with parallel-equivalent circuit Rs Equivalent series resistance measured with series-equivalent circuit model Rdc Direct current resistance R Resistance X Reactance Z Impedance Y Admittance Θd Phase angle of impedance/admittance (degree) Θr Phase angle of impedance/admittance (radian) B Susceptance Mutual inductance N Turns ratio

R&S® LCX100

Model specific features

Common features

Special Features

Display

Test signals

Measurement functions

Waveform and pattern generator

High resolution touchscreen

Graphical representation of measurements

Saving and loading device settings

Remote control of the unit functions

Tailored for use in laboratories and system racks

Test adapter

R&S® LCX-K106 Advanced analysis functions

R&S® LCX-K107 Digital I/O ports and binning function

R&S® LCX-K108 Extended bias functions

R&S® LCX-K201 Frequency Extension to 1 MHz (LCX200)

R&S® LCX-K210 Frequency Extension to 10 MHz (LCX200)

R&S® LCX-Z1

R&S® LCX-Z2

R&S® LCX-Z3

R&S® LCX-Z4

R&S® LCX-Z5

R&S® LCX-Z11

R&S® ZZA-GE23

Downloads

Datasheet

Guide