The high-voltage differential probes of the DP series are based on Micsig's innovative SigOFITTM technology. They are characterised by a very low noise floor, excellent amplitude-frequency characteristics and industry-leading common mode rejection, enabling users to test high frequency and high voltage signals with ease. Micsig DP series probes can be used with oscilloscopes from all manufacturers.
Features
- 5 MHz bandwidth limitation: When measuring the FET switching frequency in most switching power supplies, the DP probe effectively eliminates high-frequency noise.
- Quick Zero: Short-circuit the test leads, press the zero button, the probe can be zeroed very quickly.
- Dual range selection: Improves the signal-to-noise ratio, meets more test requirements.
- BNC interface: Standard BNC interface, works with any oscilloscope.
- USB power supply: Powered directly from the oscilloscope's USB port via a Type-C cable.
- Overvoltage alarm: LED flashes, buzzer "beeps" quickly and indicates an over-range alert.
- Exceptionally compact: Much smaller than conventional differential probes.
Micsig DP700 series
| Model | DP700 | DP702 | DP703 - remaining stock | DP705 - remaining stock |
|---|---|---|---|---|
| Bandwidth | 100 MHz | 200 MHz | 300 MHz | 500 MHz |
| Delaye time | 11.7ns (20X) 11.7ns (200X) | 11.7ns (20X) 11.7ns (200X) | 10.83ns (20X) 11.56ns (200X) | 10.83ns (20X) 11.56ns (200X) |
| Attenuation | 20 : 1 200 : 1 | 20 : 1 200 : 1 | 20 : 1 200 : 1 | 20 : 1 200 : 1 |
| Accuracy | ±1 % | ±1 % | ±1 % | ±1 % |
| Max. input Differential Voltage (DC+AC PK) | 70 V （20 : 1） 700 V （200 :1） | 70 V （20 : 1） 700 V （200 :1） | 70 V （20 : 1） 700 V （200 :1） | 70 V （20 : 1） 700 V （200 :1） |
| Category | CAT I 600 V CAT II 450 V | CAT I 600 V CAT II 450 V | CAT I 600 V CAT II 450 V | CAT I 600 V CAT II 450 V |
| CMRR | DC: > -80 dB 100 kHz: > -60 dB 10 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 10 MHz: > -30 dB 100 MHz: > -26 dB | DC: > -80 dB 100 kHz: > -60 dB 20 MHz: > -40 dB | DC: > -80 dB 100 kHz: > -60 dB 20 MHz: > -40 dB |
| Input impedance | 6 MΩ 1,67 pF （differential） 3 MΩ 3,3 pF （single） | 6 MΩ 1,67 pF （differential） 3 MΩ 3,3 pF （single） | 4 MΩ 1,175 pF （differential） 2 MΩ 2,35 pF （single） | 4 MΩ 1,175 pF （differential） 2 MΩ 2,35 pF （single） |
| Overrange | LED flashes, Buzzer beeps | LED flashes, Buzzer beeps | LED flashes, Buzzer beeps | LED flashes, Buzzer beeps |
| Power supply | USB Type C | USB Type C | USB Type C | USB Type C |
| Otput | 2 W | 2 W | 2 W | 2 W |
| Cable length input | ca. 31 cm | ca. 31 cm | ca. 8 cm | ca. 8 cm |
| Cable length output | ca. 100 cm | ca. 100 cm | ca. 120 cm | ca. 120 cm |
| Availability | in stock | in stock | discontinued, remaining stock | discontinued, remaining stock |
Downloads
Datasheet
DP series brochure/data sheet
Language: English
Version: V 250110
File Size: 271.50 KiB
Release Date: 10.01.2025
Micsig DP High Voltage Differential Probe
DP series brochure/data sheet
Language: English
File Size: 1.05 MiB
Release Date: 26.12.2025
Micsig DP High Voltage Differential Probe (new design 2026)
Manual
DP series 100 - 200 MHz Manual
Language: English
Version: V 241204
File Size: 668.43 KiB
Release Date: 04.12.2024
Micsig DP High Voltage Differential Probe
DP series QSG
Language: English
File Size: 279.02 KiB
Release Date: 25.12.2025
Micsig DP High Voltage Differential Probe (new design 2026)