Name: Micsig RCP3000XS-80
Brand: Micsig
Availability: InStock

Description

The Rogowski probes of the RCP-XS series measure alternating current up to 12,000 Apk with a bandwidth of 2 Hz to 30 MHz, an accuracy of 1 % and a noise level of less than 2 to 18 mVpp. Within the measuring range, the output signal of the system and the current signal to be measured are always linear, so that the accuracy does not change with the current; the coil contains no magnetic saturation components and no magnetic core or saturation phenomena, no heating problem; the Rogowski coil contains no ferromagnetic materials and therefore has no hysteresis effect; the phase difference between the output signal and the current waveform is extremely small and can be less than 0.8°. The RCP-XS models are compact and easy to handle, they have a standard BNC interface and a 12 V DC connection. They can measure current signals with complex waveforms, such as transient inrush currents from power devices, sinusoidal currents of three-phase power supply systems, harmonic components of measured currents, current measurements of IGBTs and MOSFETs, etc.

Model	RCP60XS	RCP120XS	RCP300XS	RCP600XS	RCP1200XS	RCP3000XS	RCP6000XS	RCP12000XS
Bandwidth	85 Hz - 30 MHz	34 Hz - 30 MHz	10 Hz - 30 MHz	10 Hz - 30 MHz	12 Hz - 30 MHz	3 Hz - 30 MHz	2 Hz - 30 MHz	2 Hz - 30 MHz
Peak current	60 Apk	120 Apk	300 Apk	600 Apk	1200 Apk	3000 Apk	6000 Apk	12000 Apk
Output sensitivity	100 mV/A（10x）	50 mV/A（20x）	20 mV/A （50X）	10 mV/A（100X）	5 mV/A （200X）	2 mV/A（500X）	1 mV/A（1000X）	0.5 mV/A（2000X）
Accuracy (typical)	2 %	2 %	2 %	2 %	2 %	2 %	2 %	2 %
Peak di/dt	4 kA/μs	8 kA/μs	20 kA/μs	40 kA/μs	70 kA/μs	70 kA/μs	70 kA/μs	70 kA/μs
Droop	65 %/ms	35 %/ms	9 %/ms	6 %/ms	3 %/ms	2 %/ms	2 %/ms	2 %/ms
Noise	＜20 mVpp	＜20 mVpp	＜18 mVpp	＜12 mVpp	＜5 mVpp	＜5 mVpp	＜5 mVpp	＜6 mVpp