Accessory R&S RTB24
14 of 14 Article
The largest display 25.7 cm (10.1") with the highest resolution of 1280 × 800 pixel in its class, a capacitive touchscreen to quickly navigate in pop-up menus and a touch function to easily adjust scaling, to zoom in or to move a waveform – works just like your smartphone.
The 10-bit A/D converter yields up to a four-fold improvement compared to conventional 8-bit A/D converters. You get sharper waveforms with more signal details.
10 Msample memory depth is available on each channel if all channels are active. When interleaved, 20 Msample are available. That is 10 times more than comparable oscilloscopes offer. This captures longer signal sequences for more analysis results.
The R&S® RTB24-300 gives users more than just an oscilloscope. It also has the capabilities for a logic analyzer, protocol analyzer, waveform and pattern generator and digital voltmeter. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient – and satisfies the all-important rule of investment protection at a very attractive price.
| Features | RTB2002 | RTB2004 |
|---|---|---|
| Channel | 2 | 4 |
| Bandwidth | 70-300 MHz | 70-300 MHz |
| Sample Rate | 1.25 GSa/s per channel 2.5 GSa/s interleaved | 1.25 GSa/s per channel 2x 2.5 GSa/s interleaved |
| Waveform Capture Rate | 50000 wfms/s | 50000 wfms/s |
| Memory Depth | 10 Mpts per channel 20 Mpts interleaved | 10 Mpts per channel 2x 20 Mpts interleaved |
| Waveform / Pattern Generator | option | option |
| Logic Analyzer | option | option |
You will find the specifications of the RTB2000 series here.
| RTB2002 bandwidth + MSO sets (2 channels) | Bandwidth | Logic analyzer |
|---|---|---|
| RTB2002 | 70 MHz (upgradable) | Option |
| RTB2K-72M | 70 MHz (upgradable) | |
| RTB2K-102 | 100 MHz (upgradable) | Option |
| RTB2K-102M | 100 MHz (upgradable) | |
| RTB2K-202 | 200 MHz (upgradable) | Option |
| RTB2K-202M | 200 MHz (upgradable) | |
| RTB2K-302 | 300 MHz | Option |
| RTB2K-302M | 300 MHz | |
| RTB2K-COM2 | 300 MHz |
| RTB2004 bandwidth + MSO sets (4 channels) | Bandwidth | Logic analyzer |
|---|---|---|
| RTB2004 | 70 MHz (upgradable) | Option |
| RTB2K-74M | 70 MHz (upgradable) | |
| RTB2K-104 | 100 MHz (upgradable) | Option |
| RTB2K-104M | 100 MHz (upgradable) | |
| RTB2K-204 | 200 MHz (upgradable) | Option |
| RTB2K-204M | 200 MHz (upgradable) | |
| RTB2K-304 | 300 MHz | Option |
| RTB2K-304M | 300 MHz | |
| RTB2K-COM4 | 300 MHz |
Special Features
Oscilloscope
With a sampling rate of up to 2.5 Gsample/s and a memory depth of up to 20 Msample, the R&S® RTB24-300 oscilloscope excels in its class. A waveform update rate of more than 50 000 waveforms/s ensures a responsive instrument that reliably catches signal faults. Included standard tools provide quick results, e.g. QuickMeas, mask tests, FFT, math, cursors and automatic measurements, mincluding statistics.
Logic analyzer
The R&S®RTB-B1 option turns every R&S® RTB24-300 into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and timecorrelated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.
Protocol analyzer
Protocols such as I2C, SPI and CAN/LIN frequently transfer control messages between integrated circuits. The R&S® RTB24-300 has versatile options for protocol-specific triggering and decoding of serial interfaces. Selective acquisition and analysis of relevant events and data is possible. With the hardware-based implementation, smooth operation and a high update rate is ensured even for long acquisitions. This is advantageous, for example, to capture multiple packetized serial bus signals.
Waveform and pattern generator
The optional R&S®RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Before playing signals back, the user can preview them to quickly check signal correctness. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.
Digital voltmeter
The R&S® RTB24-300 features a three-digit voltmeter (DVM) and sixdigit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DCRMS and ACRMS – included in scope of delivery.
Frequency analysis mode
Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S® RTB24-300 is activated with the push on a button and by just entering center frequency and span. Due to the high-performance FFT functionality of the R&S® RTB24-300 oscilloscopes, signals can be analyzed with up to 128k point. Other practical tools include cursor measurements and autoset in frequency domain.
Mask test mode
Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S® RTB24-300. This pulse output can be used to trigger actions in the measurement setup.
History and segmented memory mode
The R&S®RTB-K15 history function option increases the memory from 10 Msample to 160 Msample. Users scroll through past acquisitions and analyze the data using all of the oscilloscope tools, e.g. protocol decode and logic channels. Serial protocol and pulse sequences are recorded practically without interruptions.R&S® RTB2000 - Video ADC
The R&S® RTB2000 features a customized Rohde & Schwarz engineered 10-bit A/D converter that delivers a fourfold improvement compared to conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed.
R&S® RTB2000 - Video memory
Das R&S® RTB2000 bietet die beste Speichertiefe seiner Klasse: Es sind 10 Msample pro Kanal verfügbar, im Interleaved-Modus sogar 20 Msample.
The R&S® RTB2000 offers a class-leading memory depth:10 Msample per channel are available, even 20 Msample in interleaved mode. This is 10 times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates.
R&S® RTB2000 – Video Touchscreen
The R&S® RTB2000 features a 10.1'' capacitive touch screen, with a high resolution of 1280 x 800 pixels. Quickly navigate in pop-up menus and simply touch to adjust scaling, to zoom in or to move a waveform – just like on your smartphone.
R&S® RTB2000 – Video FFT
Difficult-to-find faults often result from the interaction between time and frequency signals. R&S® RTB2000 includes frequency analysis as a standard feature. is activated with the push on a button and by just entering center frequency and span.
R&S® RTB2000 - Video annotations
The R&S® RTB2000 makes sharing your results easy. Reports can be efficiently created with the handy and flexible screen annotation tool. Screenshots or instruments settings can be saved at the push of a button.
R&S® RTB2000 -Video logic analyzer
Turn every R&S® RTB2000 into an intuitive-to-use MSO with 16 additional digital channels by simply activating the R&S® RTB-B1 option.
The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and timecorrelated to each other.
R&S® RTB2000 - Video function and pattern generator
The R&S® RTB2000's optional waveform and pattern generator (R&S® RTB-B6) up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware.
Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns.
R&S® RTB2000 - Video triggering and decode options
Protocols such as I2C, SPI and CAN/LIN frequently transfer control messages between integrated circuits.
The R&S® RTB2000 has versatile options for protocol-specific triggering and decoding of serial interfaces.
R&S® RTB2000 - Video boot time
The R&S® RTB2000 boots in under 10 seconds - faster than other scopes in its class.
