The oscilloscopes of the MDO series offer 4 analogue channels, 250, 350 or 500 MHz bandwidth, a 3 GSa/s sampling rate and a memory depth of 360 Mpts.
The Micsig MDO3504 has a 14 inch integrated touchscreen display with 1,920 x 1,200 pixels, combined with Micsig's 10+ years of experience in touch control technology the MHO series takes the touch experience to a new level.
The Micsig MDO3504 comes in a compact format and features comprehensive measurement and maths operation functions and supports triggering and decoding.
It is also equipped with digital hardware filter modules and other functions.
| Specifications | MDO2504 | MDO3504 | MDO5004 |
|---|---|---|---|
| Channels | 4 | 4 | 4 |
| Bandwidth | 250 MHz | 350 MHz | 500 MHz |
| Real-time sampling rate | 3 GSa/s | 3 GSa/s | 3 GSa/s |
| Max. waveform capture rate | 230,000 wfms/s | 230,000 wfms/s | 230,000 wfms/s |
| Memory Depth | 360 Mpts | 360 Mpts | 360 Mpts |
| Vertical resolution | 8 bits | 8 bits | 8 bits |
| Std. bus decoding | RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD-1553B | RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD-1553B | RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD-1553B |
| Interfaces | USB 3.0 Host, USB Typ C, LAN, HDMI, Trigger out | USB 3.0 Host, USB Typ C, LAN, HDMI, Trigger out | USB 3.0 Host, USB Typ C, LAN, HDMI, Trigger out |
| Display | 14" full touch display, 1920 x 1200 resolution | 14" full touch display, 1920 x 1200 resolution | 14" full touch display, 1920 x 1200 resolution |
| Dimensions / Net Weight | 400 x 280 x 35.8 mm / 4.3kg | 400 x 280 x 35.8 mm / 4.3kg | 400 x 280 x 35.8 mm / 4.3kg |
Most friendly UI
Equipped with instrument-dedicated SigTestUI™ operating system, and accumulation of 10 years of UI design experience, the MDO series evolved to simplify all user interfaces, newer engineers can quickly learn to use in 5 minutes.
Complete connectivity
Original Mic-OPI™ probe interface, automatically identifies passive probe attenuation, one-click to proceed auto-calibration; standard with BNC adapter, also has USB 3.0 Host, USB Type-C, LAN, HDMI, Trigger out etc.
Low noise floor
The noise of MDO series is less than 80 μVrms under 500 MHz full bandwidth, allow engineers accurately capture weak but important signals during daily circuit debugging.
Space saving and universally mountable
Can be mounted with standard wall brackets or table stands thanks to VESA, takes up very little space on the table due to its shallow depth.
Deep memory and segmented storage acquisition
Up to 360Mpts memory depth delivers excellent signal fidelity, segmented storage divides the limited storage space into multiple small segments, and collects multiple trigger events into one storage space, effectively captures target signals multiple times over a long period of time and play back for further analysis.
Comprehensive selection of probes
In addition to the standard passive probes, the MDO series supports connection to all Micsig probes: optical-fiber isolated probe, high-voltage differential probes, and AC/DC current probes, such combination can maximize the performance of the probe and oscilloscope.
Hardware digital filter
Hardware digital filtering can selectively pass or block signal components within a specific frequency range, very useful for analyzing specific frequency bands of a signal or observing changes in specific frequency components.
Supports remote control and HDMI
The MDO series support PC and smartphone remote control, also have HDMI port for demonstration purpose. Support SCPI programming commands control, helping engineers achieve automated measurements more flexibly and efficiently.
Downloads
Datasheet
MDO Series Data sheet
Language: English
File Size: 14.11 MiB
Release Date: 02.01.2024
Manual
MDO Manual
Language: English
File Size: 14.90 MiB
Release Date: 19.02.2024