Accessory Rohde & Schwarz MXO5C-8
13 of 13 Article
The 12-bit A/D converter yields up to a sixteen-fold improvement compared to conventional 8-bit A/D converters. You get sharper waveforms with more signal details. 500 Msample memory depth is available on each channel if all channels are active. That is much more than comparable oscilloscopes offer. This captures longer signal sequences for more analysis results.
The R&S® MXO5C-82 gives users more than just an oscilloscope. It also has the capabilities for a logic analyzer, spectrum analyzer and waveform generator. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient – and satisfies the all-important rule of investment protection at a very attractive price.
| Model | MXO5C-4 | MXO5C-8 |
|---|---|---|
| Channels | 4 | 8 |
| Bandwidth | 350 MHz - 2 GHz | 100 MHz - 2 GHz |
| Sample Rate | 5 GSa/s on 2 channels 2.5 GSa/s on 4 channels | 5 GSa/s on 2 channels 2.5 GSa/s on 8 channels |
| Waveform Capture Rate | 4.500.000 wfms/s | 4.500.000 wfms/s |
| Memory Depth | Standard Memory Depth:
With MXO5C-B110 Option:
| Standard Memory Depth:
With MXO5C-B110 Option:
|
| Waveform Generator | option | option |
| Logic Analyzer | option | option |
You will find the specifications of the MXO5C series here.
| MXO5C-4 bandwidth sets (4 channel) | bandwidth |
|---|---|
| MXO5-43 | 350 MHz (upgradable) |
| MXO5-45 | 500 MHz (upgradable) |
| MXO5-410 | 1 GHz (upgradable) |
| MXO5-420 | 2 GHz |
| MXO5C-8 bandwidth sets (8 channel) | bandwidth |
|---|---|
| MXO5-81 | 100 MHz (upgradable) |
| MXO5-82 | 200 MHz (upgradable) |
| MXO5-83 | 350 MHz (upgradable) |
| MXO5-85 | 500 MHz (upgradable) |
| MXO5-810 | 1 GHz (upgradable) |
| MXO5-820 | 2 GHz |
Special Features
Frontal view
- Ground terminal for the housing
- Connections for probe compensation
- E-Ink display
- Information LEDs and ‘Info’ button for changing the display pages
- USB connections
- Connections for logic probe (R&S MXO5C-B1 mixed-signal option)
- Analog input channels
- [Power] button
Rear view
- Solid State Disk (SSD)
- LAN connection
- USB connection
- Option slot
- Connection for AC power supply and mains switch
- External trigger input
- Trigger Out connector
- Ref In 10 MHz
- Ref Out 10 MHz
- Connection for optional function generator (BNC, option arbitrary waveform generator R&S MXO5C-B6)
- HDMI display output
- DisplayPort display output
4.500.000 wfms/s Real-time acquisition rate
Find signal anomalies quickly. Smooth workflows – even with measurements, spectrum, math or long acquisitions.
- 4.5 M wfms/s (not a special mode)
- 100 % trigger captures up to 4.5 M events/sec
- Trigger re-arm time < 21 ns
- Acquire, process & display signals with unrivaled speed
- Detect signal faults & anomalies quickly
- Increase your statistical confidence
12-bit ADC
High resolution & offset. Low noise signal path. More accurate measurements.
- 12-bit ADC at all sample rate
- Lowest Noise: 120 uV full screen @ 1 mV/div and 1.5 GHz bandwidth
- Largest offset range at highest sensitivity: +/- 5V @ 500 uV/div
Digital Trigger
Isolate events with even more precision.
- Detect trigger event on sampled waveforms
- Adjustable trigger sensitivity
- Minimal trigger jitter < 1ps
- Standard feature
Deepest standard memory
Capture more time. Fast sampling rate even with slow timebase.
- Standard memory: 500 Mpts per channel
- Maximum memory: 1 Gpts
- Segmented memory & History mode
- ASIC signal processing
- Measure more (at high sample rate)
- Capture distant trigger events
Spectrum analysis
Fastest FFT > 45 kFFT/s. Spectrum & EMI debugging.
- Fastest RF insights into your measurement
- Independent span/RBW control vs time base
- Automatic peak list and max/min-hold measurement
Using model as bench scope
Use model as bench scope
Use your MXO 5C series oscilloscope for stacking in order to have more space in your lab
19" rack mounted
Use your MXO 5C series oscilloscope with only 2U height for your rackmount application with limited space
Easy Oscilloscope Remote Use
Take advantage of the R&S MXO 5C series oscilloscope and its remote access capability. View the display on a PC or mobile device with the same user interface as the oscilloscope and control your measurements from anywhere.
Downloads
Product information
MXO 5C Product Brochure
Language: English
Version: V 6
File Size: 8.21 MiB
Release Date: 10.03.2025
MXO 5C Product Brochure
Language: French
Version: V 5
File Size: 5.98 MiB
Release Date: 17.02.2025
MXO 5C Product Brochure
Language: Spain
Version: V 6
File Size: 8.39 MiB
Release Date: 31.03.2025
MXO 5C Product Brochure
Language: German
Version: V 4
File Size: 6.13 MiB
Release Date: 26.02.2025
Datasheet
MXO 5C Datasheet
Language: English
Version: V 8
File Size: 1.41 MiB
Release Date: 10.03.2025
Manual
MXO 5C Getting Started
Language: German
Version: V 2.0
File Size: 2.55 MiB
Release Date: 15.05.2024
● MXO 54C, 4 channels (1802.3000k04) firmware version 2.1+ ● MXO 58C, 8 channels (1802.2000k08) firmware version 2.1+
MXO 5C Getting Started
Language: English
Version: V 3
File Size: 2.58 MiB
Release Date: 15.01.2025
● MXO 54C, 4 channels (1802.3000k04) firmware version 2.1+ ● MXO 58C, 8 channels (1802.2000k08) firmware version 2.1+
MXO 5C Getting Started
Language: Spain
Version: V 2
File Size: 2.55 MiB
Release Date: 13.05.2024
● MXO 54C, 4 channels (1802.3000k04) firmware version 2.1+ ● MXO 58C, 8 channels (1802.2000k08) firmware version 2.1+
MXO 5C User Manual
Language: English
Version: V 6
File Size: 36.69 MiB
Release Date: 12.03.2025
● MXO 54C, 4 channels (1802.3000k04) firmware version 2.1+ ● MXO 58C, 8 channels (1802.2000k08) firmware version 2.1+
Guide
MXO 5C Series Oscilloscope Security Procedures
Language: English
Version: V 1.0
File Size: 238.79 KiB
Release Date: 15.05.2024