Innovative Tools. Excellent Service.
Picture:  Rohde & Schwarz HMC8015
Picture:  Rohde & Schwarz HMC8015 Picture:  Rohde & Schwarz HMC8015 Picture:  Rohde & Schwarz HMC8015

Rohde & Schwarz HMC8015

Premium power analyzer with a power range from 50 μW to 12 kW, an analogue bandwidth from DC up to 100 kHz and a sampling rate of 500 ksample/s.

Delivery including

  • Operating manual
  • Power cord

€ 1,963.50 incl. VAT

€ 1,650.- net

with FREE shipping within the EU!Shipping costs outside EU


Availability:
Picture: n/a

This article is in stock again in 11 to 21 days.

Share on facebook
Google +1
Twitter

The R&S® HMC8015 power analyzer is the first compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC62301, EN50564 and EN61000-3-2.

The power analyzer is the only instrument in its class that graphically displays harmonic analysis up to the 50th harmonic on the logarithmic scale. Its user‑configurable, dual‑channel trend chart function for U, I, P, S, Q and F etc. is unique as well. The instrument's 5 V measurement range provides embedded developers with a previously unattainable level of resolution for power and energy measurements.

The R&S®HMC8015 also sets new standards when it comes to documentation. It simultaneously displays up to 10 user‑configurable measurands with a refresh rate of 10 measurements per second. A logging function makes it possible to store this data with a timestamp in CSV format for a nearly unlimited period of time. Screen content can also be saved to a USB flash drive anytime at the push of a button.

A PASS/FAIL function enables users to monitor numerous measurands either on the instrument's display or externally via an analog/digital output on the rear panel. The inrush function captures and graphically displays inrush current and voltage waveforms.

The instrument's standard hardware‑based integrator delivers highly precise, seamless power consumption analysis and adds up watt and ampere hours according to polarity. An additional sensor input for a current probe or shunt expands the tester's current measurement range as required. A three-stage filter in the voltage and cur‑ rent circuit of the acquisition system can be activated, if necessary.

The LXI-Core 1.4‑compliant power analyzer can be remotely controlled via an Ethernet, USB or GPIB interface (R&S® HMC8015-G). The commands are based entirely on the SCPI standard. The virtual COM port and the test and measurement class (TMC) are supported for communi‑ cations via USB. Cost‑free driver packages for LabVIEW, LabWindows/CVI, VXI and IVI.net are also available for fast, complication‑free integration of the R&S® HMC8015 into existing systems.

Power Analyzer R&S HMC8015 R&S HMC8015-G
Power measurement range 50 µW to 12 kW 50 µW to 12 kW
Analog bandwidth DC to 100 kHz DC to 100 kHz
Sampling rate 500 ksample/s 500 ksample/s
Resolution 16 bit resolution for current and voltage 16 bit resolution for current and voltage
Accuracy 0,05 % 0,05 %
Power Analyzer R&S HMC8015 R&S HMC8015-G
Display 8.9 cm (3,5") TFT (color) 8.9 cm (3,5") TFT (color)
Interface
  • LAN
  • USB
  • LAN
  • USB
  • IEEE-488-(GPIB)-Interface (G Modell)
Dimensions 222 mm × 280 mm × 88 mm 222 mm × 280 mm × 88 mm
Weight 3.25 kg 3.25 kg
Warranty 3 years 3 years

**You will find the specifications of the HMC8015 series here.


Accessory R&S HMC8015

R&S® HVC151 Advanced Analysis

Be the first to write a review

Advanced Analysis option for R&S® HMC8015.

  • Spectrum Analyzer Harmonics as bar chart or table view
  • Voltage, current and power display of an input signal period over time
  • Graphically display of switch‑on behavior
  • Peak-Hold function

R&S® HVC152 Advanced I/O

Be the first to write a review

Advanced IO option for R&S® HMC8015.

  • Activation of the sensor input function for current probe or shunt
  • Limit testing with PASS/FAIL indication 2) for up to 6 limits selectable from 14 measurands (e.g. U, I, P, S, Q, F)

R&S® HVC153 Compliance Test

Be the first to write a review

Compliance Test Option for RS®HMC8015.

  • Compliance test for key standby and harmonic standards:
    • IEC 62301 (Standby-Norm)
    • EN50564 (Extended standby standard)
    • EN 61000-3-2 (Harmonic Current for EMC, CE Approval)

R&S® HZC815-EU Power Adapter EU

Be the first to write a review

EU mains adapter for R&S® HMC8015 Power analyzer.

R&S® HZC815-GB Power Adapter GB

Be the first to write a review

UK mains adapter for R&S® HMC8015 Power analyzer.

R&S® HZC815-US Power Adapter US

Be the first to write a review

US mains adapter for R&S® HMC8015 Power analyzer.


Downloads

Datasheet

Manual

Adobe PDF

Rohde & Schwarz HMC8015 Manual

Language: Deutsch
Version: V 05
File Size: 4.11 MiB
Release Date: 24.05.2016

Adobe PDF

Rohde & Schwarz HMC8015 Manual

Language: English
Version: V 04
File Size: 4.04 MiB
Release Date: 24.05.2016