JBC C245 + D530 Soldering Tips
76 of 76 Article
High end 2 Channel Rework Station with Hot Air Station of the JBC Premium Line for professional general soldering, desoldering, repair and cleaning jobs. The JBC RMSE is equipped with a 130 W soldering Iron, a 150 W desoldering Iron, an electric pump MSE and a 700 W hot air station.
Attention: Cartridges are not included!
| Specifications | RMSD |
|---|---|
| Weight | See individual modules |
| Size | See individual modules |
| Input fuse | DDE: 2A / JTSE: 4A |
| Output Peak Power | DDE: 150 W per tool |
| Nominal Power | JTSE: 700 W |
| Temperature selection | JTSE: 150-450ºC (300-840ºF) |
| DDE: 90-450 ºC (190-840 ºF) | |
| Idle Temp. Stability (still air) | DDE: ±1.5ºC (±3 ºF) |
| Ambient operating temp. | 10 - 40 ºC (50 - 104 ºF) |
| Air Flow Regulation | JTSE: 10-50 SLPM |
| Flow rate | MSE: 9 SLPM |
| Vacuum | JTSE: 30% / 228 mmHg / 9 inHg |
| MSE:75%/570 mmHg/22.4 inHg | |
| Rated currrent | JTSE: 3A |
| Tip to ground resistance | DDE: <2 ohms |
| Tip to ground voltage | DDE: <2 mV RMS |
| Communication connectors | JTSE: USB-B |
| DDE: USB-A / USB-B / Peripheriegeräte | |
| Robot connector | RJ12 (RS-232 Protokoll) |
| Pedal connection | JTSE and MSE: P-005 Pedal |
| ESD Safe | |
| Package weight | 16.494 kg (36.36 lbs) |
| Package dimensions | 480 x 370 x 380 mm |
There are no downloads available for this product.