Accessory R&S® FPL1000
20 of 20 Article
In an RF lab, the R&S® FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
The solid RF performance makes the R&S® FPL1000 the ideal instrument for use in the lab, production and service.
- The 1 dB attenuator step size (R&S® FPL1-B25 option) allows you to perform measurements at the instrument’s max. dynamic range.
- The preamplifier (R&S® FPL1-B22 option) extends the sensitivity level. Thanks to its high sensitivity and low phase noise performance, even small interfering signals next to the carrier can be analyzed.
Using the R&S® FPL1000 is as intuitive as using a smartphone. Simple swiping gestures adjust the center frequency or the reference level. Two-finger gestures change the span or the displayed power level, while the 10.1" screen with 1280 × 800 pixel resolution provides a clear display of the signal. Furthermore, the user can freely arrange the layout of the measurement results on the display. Using the MultiView display mode, even different measurement modes can be combined and all the results can be displayed on one screen.
The R&S® FPL1000 has a depth of only one hand length. It fits into any workplace and leaves enough space for DUTs and other measurement instruments.
Its light weight and battery operation capability lets you take it anywhere to perform measurements. The optional battery pack provides three hours of operation. Thanks to its rich set of accessories, the R&S® FPL1000 is suitable for field measurements. For transport, a protective hard cover is available as well as a padded carrying bag that allows the instrument to be operated while in the bag. A shoulder harness simplifies portable operation.
| Spectrum Analyzer | R&S® FPL1003 | R&S® FPL1007 | R&S® FPL1014 | R&S® FPL1026 |
|---|---|---|---|---|
| Frequency range | 5 kHz to 3 GHz | 5 kHz to 7.5 GHz | 5 kHz to 14 GHz | 5 kHz to 26.5 GHz |
| RBW (Resolution bandwidth, –3 dB) | 1 Hz to 10 MHz | 1 Hz to 10 MHz | 1 Hz to 10 MHz | 1 Hz to 10 MHz |
| DANL (Displayed average noise level) | –155 dBm (without preamplifier) –165 dBm (with preamplifier) | –155 dBm (without preamplifier) –159 dBm (with preamplifier) | –155 dBm (without preamplifier) –159 dBm (with preamplifier) | –155 dBm (without preamplifier) –159 dBm (with preamplifier) |
| TOI/IP3 (Third order intercept) | > +20 dBm (meas.) | > +20 dBm (meas.) | > +20 dBm (meas.) | > +20 dBm (meas.) |
| Level measurement uncertainty (3 GHz) | < 0.5 dB | < 0.5 dB | < 0.5 dB | < 0.5 dB |
| Tracking generator | not available | not available | not available | not available |
| Audio frequency demodulator | AM/FM/φM option FPL1-K7 | AM/FM/φM option FPL1-K7 | AM/FM/φM option FPL1-K7 | AM/FM/φM option FPL1-K7 |
You will find further technical details of the R&S® FPL series in the FPL1000 datasheet.
Downloads
Datasheet
FPL1000 Data sheet
Language: English
Version: 09
File Size: 1.20 MiB
Release Date: 27.12.2022
Manual
FPL1000 Getting started
Language: English
File Size: 11.59 MiB
Release Date: 27.12.2018
R&S® FPL1000 Spectrum Analyzer
Language: English
Version: 13
File Size: 31.53 MiB
Release Date: 03.06.2022
The R&S FPL1000 is a Rohde & Schwarz signal and spectrum analyzer developed to meet demanding customer requirements.