Siglent SDG6052X

Be the first to write a review

Two channel waveform generator with a frequency range of 1 µHz to 500 MHz with 2.4 GSa/s sampling rate (16 bit) and 20 Mpts memory. Max. amplitude range of 10 mVpp to 20 Vpp (high resistance) or 5 mVpp to 10 Vpp (50 Ohm).

3 years warranty

Nr: SDG6052X

with FREE shipping within the EU!
Shipping costs outside EU

in Stock

€ 4,619.- net (VAT Details)

€ 5,496.61 incl. 19% VAT

Description

The Siglent SDG6000X is a 2 channel Function / Arbitrary Waveform Generator to create high quality signals up to 500 MHz (Sine). Beside the analog output, the device includes an USB-Host, an USB-device and a LAN interface. The Siglent function generators have a sophisticated and easy to use interface and offer multiple functions for all tasks. The menu navigation is very intuitive and all functions and parameters are easy to locate thanks to the graphical touch interface.

Model	SDG6022X	SDG6032X	SDG6052X
Max. Frequency	200 MHz	350 MHz	500 MHz
Resolution	1 µHz	1 µHz	1 µHz
Sample rate	300 MSa/s	300 MSa/s	300 MSa/s
Max. Sample rate (4x Interpolation)	2.4 GSa/s	2.4 GSa/s	2.4 GSa/s
Max Amplitude	20 Vpp < 40 MHz	20 Vpp < 40 MHz	20 Vpp < 40 MHz
Frequency Counter	up to 400 MHz	up to 400 MHz	up to 400 MHz
Channels	2	2	2

You will find the specifications of the SDG6000X series here.

Special Features

True Arb Technology

With SIGLENT's TrueArb technology, the generator retains the advantages of DDS technology while overcoming the serious weaknesses of DDS jitter and distortion. Because TrueArb technology generates arbitrary waveform in a point-by-point fashion, every data point is used to generate the output signal which has been stored in memory. Date points will not missed or repeated and arbitrary waveforms possess very low jitter (< 150 ps). It supports any 8 pts ~ 8 Mpts Arb waveform with a sampling rate in a range of 1 μSa/s ~ 75 MSa/s.

Easy Pulse Technology

The innovative EasyPulse technology is capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment. When a Square/Pulse waveform is generated by DDS, there will be a one-clock-jitter if the sampling rate is not an integer-related multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.

Rich Modulation Features

A wide range of analog and digital modulation modes are supported, including "internal" and "external" modulation. Supported modulation types: AM, FM, PM, FSK, ASK, DSB - AM

Burst Function

Burst signal for sine, square, ramp, pulse or arbitrary waveforms can be generated. Start phase ranges from 0° to 360° and burst period ranges from 1 µs to 1000s are supported, as well as two burst modes "N cycle" and "Gated”.

Sweep Function

Supports both logarithmic and linear sweep modes with "up" or "down" sweeping using one of the following waveforms: sine, square, ramp and arbitrary waveform. In sweep mode it can generate signals with variable frequency in a sweep time range from 1 ms to 500 s. The trigger source could be selected from internal, external and manual trigger.

Frequency Counter

The devices have a built-in high precision frequency counter with an input frequency range of 0.1 Hz to 200 MHz. Because of the separate input connector the frequency counter is independent of the two output channels.