Specifications
- Input / Output: 50 Ohm, N female
- Supply Voltage range: 110 V…240 V
- Supply power consumption: 15 W
- Operating temperature range: -20°C to 60°C
- Frequency range: 50 MHz – 1 GHz, (3MHz – 1.3GHz with reduced output power capability)
- Gain: 36dB typ., see table 1 for details
- 1dB output compression point @ 10MHz: +29.5 dBm typ.
- 1dB output compression point @ 100 MHz: +30.9 dBm typ.
- 1dB output compression point @ 500 MHz: +31.3 dBm typ.
- 1dB output compression point @ 1 GHz: +28.7 dBm typ.
- Noise figure: 2.5 dB typ.
- 2nd harmonic, 50MHz, Pout=30dBm: < – 50 dBc typ
- 2nd harmonic, 200MHz, Pout=30dBm: < – 40 dBc typ
- 3rd harmonic, 50MHz, Pout=30dBm: < – 30 dBc typ
- 3rd harmonic, 200MHz, Pout=30dBm: < – 25 dBc typ
Total harmonic distortion:
- 0.85% @200MHz, Pout=27dBm typ.
- 1.13% @200MHz, Pout=28dBm typ.
- 2.33% @200MHz, Pout=29dBm typ.
- 5.6% @200MHz, Pout=30dBm typ.
- Third order intercept point: +50dBm, @200MHz, ∆ f = 200kHz typ.
- Input return loss: 50 MHz:
- 11dB typ.
- 800 MHz: 16dB typ.
Output VSWR:
- 50 MHz: 2.1:1
- 800 MHz: 1.4:1
Maximum ratings:
- Maximum input power: +3 dBm
The output of the TBLPA1 is quite tolerant to output mismatch, however open or shorted load is not recommended, potentially can cause damage.
Small Signal Gain (measured with Pin = – 20 dBm):
| 3 MHz | 5 MHz | 10 MHz | 25 MHz | 50 MHz | 100 MHz | 200 MHz | 300 MHz | 400 MHz |
|---|---|---|---|---|---|---|---|---|
| 16 dB | 34 dB | 43 dB | 42 dB | 41 dB | 40 dB | 39 dB | 38.5 dB | 38.3 dB |
| 500 MHz | 600 MHz | 700 MHz | 800 MHz | 900 MHz | 1 GHz | 1.1 GHz | 1.2 GHz | 1.3 GHz |
| 38 dB | 37.8 dB | 37 dB | 35.4 dB | 36.5 dB | 36.2 dB | 35.5 dB | 33.7 dB | 32.1 dB |
Application:
- General-purpose RF power amplifier
Downloads
Datasheet
TBLPA1 Data sheet
Language: English
Version: V1.3
File Size: 296.19 KiB
Release Date: 26.05.2021