Current Probe R&S® RT-ZC02
Rohde&Schwarz current probes enable accurate, non-intrusive measurement of DC and AC currents. Different models are available to measure currents in the range of 1 mA to 2000 A with a maximum bandwidth of up to 120 MHz.
DC and AC measurements without circuit interruption
The R&S®RT-ZC current probes precisely measure direct and alternating current without interrupting the power circuit for the measurement. The extra-large opening on the R&S®RT-ZC10 accommodates conductors of up to 20 mm in diameter. The R&S®RT-ZC10 can measure peak currents up to 300 A (500 A for a single pulse). When measuring low-amplitude, high-frequency currents, the more compact R&S®RT-ZC20 with a measurement bandwidth of 100 MHz is ideal.
Robust design and easy operation
Rohde&Schwarz current probes are characterized by their robust design and easy operation. The degauss and offset correction is performed directly at the probe connector. The compact R&S®RT-ZA13 probe power supply supplies up to four current probes. The current probes can be selected as predefined probes on the R&S®RTO and R&S®RTM oscilloscopes
|Bandwith||20 kHz||100 kHz||2 MHz||10 MHz||10 MHz||50 MHz||100 MHz||100 MHz||120 MHz|
|Max. Current||2000 A ||30 A||500 A||150 A||150 A||30 A||30 A||30 A||5 A|
|Sensitivity||0.001 V/A ||0.1 V/A||0.01 V/A||0.01 V/A||0.01 V/A||0.1 V/A||0.1 V/A||0.1 V/A||1 V/A|
|Rise Time||5 µs||1 µs||175 ns||35 ns||35 ns||7 ns||3.5 ns||3.5 ns||2.9 ns|
|R&S Probe connect|
|Requires RT-ZA13 power supply|