Accessory Siglent SHS-X
3 of 3 Article
Innovative Tools. Excellent Service.
SIGLENT’s Handheld Digital Oscilloscopes include the SHS800X and SHS1000X models. Both feature 2 analog oscilloscope input channels and are available in 200 MHz and 100 MHz analog bandwidths, a single ADC with 1 GSa/s maximum sample rate, and a single memory module with 12 Mpts memory depth.
When two channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 6 Mpts. When only a single channel is actived, the maximum sample rate is 1 GSa/s and the maximum record length is 12 Mpts.
For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.
The SHS800X series has two non-isolated scope channels and one isolated multimeter channel.
The SHS1000X series features full isolation between the two oscilloscope channels, one multimeter channel, power adapter and the USB host/device port. The full isolation makes it ideal for both laboratory and floating signal measurement because it reduces the risk of accidental short circuits.
The max voltage input to the analog scope inputs is CATIII 600 Vrms, CATII 1000 Vrms. And the max input for the multimeter is CATIII 600 Vrms, CATII 1000 Vrms.
The Siglent SHS820X have multiple powerful triggering modes including serial bus triggering as well as free decoding for IIC, SPI, UART, CAN, LIN bus types.
The Siglent SHS820X also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Another powerful addition is the new 1 million point FFT math function that gives the SHS very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response.
The Siglent SHS820X feature built-in sample and measurement value recorders. The sample recorder can achieve a maximum sampling rate of 25 kSa/s, and can record for up to 22 hours at this sampling rate.
The measurement value recorder can simultaneously record 4 sets of measurement values at a recording interval as low as 0.1s which delivers up-to 25 hours of continuous recording.
The Siglent SHS820X integrates a 6000 count digital multimeter, isolated from the scope that can measure DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Diodes, and Continuity.
A rechargeable 6900 mAh lithium battery supports up-to 5.5 hours (4 hours SHS1000X) of work without a charge.
The handheld oscilloscopes feature a sealed IP51 dust and drip-proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.
| Features | SHS800X | SHS1000X |
|---|---|---|
| Channel | 2 | 2 |
| Bandwidth | 100 MHz - 200 MHz | 100 MHz - 200 MHz |
| Sample rate | 1 channel with 1 GSa/s 2 channel with each 500 MSa/s | 1 channel with 1 GSa/s 2 channel with each 500 MSa/s |
| Waveform capture rate | 400.000 wfms/s (Sequence mode) | 400.000 wfms/s (Sequence mode) |
| Memory depth | 1 channel with 12 Mpts 2 channel with 6 Mpts | 1 channel with 12 Mpts 2 channel with 6 Mpts |
| Max input Voltage (Scope) | CAT II 300 Vrms Between BNC Signal and Protecting Earth CAT II 30 Vrms Between BNC GND and Protecting Earth CAT II 300 Vrms Between BNC Signal and BNC GND | CAT III 600 Vrms, CAT II 1000 Vrms Between BNC Signal and Protecting Earth CAT III 600 Vrms, CAT II 1000 Vrms Between BNC GND and Protecting Earth CAT III 300 Vrms Between BNC Signal and BNC GND |
| Max input Voltage (Meter) | CAT III 300 Vrms, CAT II 600 Vrms | CAT III 600 Vrms, CAT II 1000 Vrms |
| Isolated channel |
| SHS-X | Bandwidth | Channel | Isolated channel |
|---|---|---|---|
| SHS810X | 100 MHz | 2 | |
| SHS820X | 200 MHz | 2 | |
| SHS1102X | 100 MHz | 2 | |
| SHS1202X | 200 MHz | 2 |
You will find the specifications of the SHS-X series here.
Record Length of up to 12 Mpts
Using hardware-based Zoom technologies and max record length up to 12 Mpts, users can oversample to capture for longer periods at higher resolution and use the zoom feature to see more details within each signal.
Up to 400.000 wfm/s waveform update rate
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture unusual or low-probability events.
256-Level Intensity Grading and Color Temperature Display
The color temperature display is similar to the intensity-graded trace function, but the trace occurrence is represented by different colors (color “temperature”) as opposed to changes in the intensity of one color. Red colors represent events that occur more frequently, while blue is used to mark points that occur less frequently.
Serial Bus Decoding Function
The Siglent SHS820X displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format.
1M points used to calculate the FFT
The new math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high-frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Support Peaks, Markers, a variety of numbers.
6000 Counts Digital Multimeter
6000 count digital multimeter featured function of DCV, true RMS ACV, DCI, ACI, Diode, Resistance, Capacitance, and Continuity.
Sample Logger
The Sample Logger is the mode of logging the sampling points for a long time. For there are many sampling points to log, they are logged into the internal flash or external U disk in real-time. After stopping logging, the user can recall the sampling points on the oscilloscope, or analyze the saved data on the computer.
Measurement Logger
The measurement Logger is the mode of logging the measurement value for a long time. For the amount of measurement data is relatively small, to process quickly, the data is logged in memory. After stopping logging, the data can be saved into the internal flash or external U disk.
Poweradapter
The Siglent SHS820X supports adapter power supply and battery power supply. After connecting the adapter, the battery enters into charging mode. The adapter provides a maximum 4 A output current.
Battery
The Siglent SHS820X uses a UL2054 certified lithium battery package. The battery capacity of 6900 mAh can guarantee long-term operation without an external power supply for up to 5.5 hours (SHS800X) and 4 hours (SHS1000X). The battery supports an external charger to further meet the requirements of portability.
Downloads
Datasheet
SHS-X Datasheet
Language: English
File Size: 2.22 MiB
Release Date: 26.04.2022
Guide
SHS-X Programming guide
Language: English
File Size: 9.59 MiB
Release Date: 07.06.2022
Manual
SHS-X Manual
Language: English
File Size: 7.85 MiB
Release Date: 07.06.2022
SHS-X Quick start
Language: English
File Size: 2.11 MiB
Release Date: 07.06.2022