Accessories, Vector Network Analyzer SHN900A
38 of 38 Article
The Siglent SHN900A series vector network analysers are powerful and flexible tools with a frequency range from 30 kHz to 26.5 GHz. The 2-port models in the SHA900A series provide reliable automatic measurements and numerous functions.
These devices are designed to give you optimum and immediate insight into scatter, difference and time domain measurements. The series is also very powerful and accurate for determining the Q-factor and insertion loss of a filter.
Five sweep types are possible:
- Linear frequency mode
- Logarithmic frequency mode
- Power sweep mode
- CW time mode and
- Segment sweep mode
The SHN900A series VNAs also support scattering parameter correction of SOLT, SOLR, TRL, Response and Enhanced Response for more flexibility in R&D and manufacturing applications.
The Siglent SHN900A has a very well designed and easy to use interface. It also offers a wide range of comfort functions for all tasks. The menu navigation is intuitive to use and all functions and parameters are easy to operate.
| Model Overview | SHN914A | SHN920A | SHN926A |
|---|---|---|---|
| Frequency range | 30 kHz - 14 GHz | 30 kHz - 20 GHz | 30 kHz - 26.5 GHz |
| Ports | 2 | 2 | 2 |
| Frequency resolution | 1 Hz | 1 Hz | 1 Hz |
| Dynamic range | 100 dB (Spez.) - 110 db (typisch) | 100 dB (Spez.) - 110 db (typisch) | 100 dB (Spez.) - 110 db (typisch) |
| Setting range of output level | -45 dBm ~ +10 dBm | -45 dBm ~ +10 dBm | -45 dBm ~ +10 dBm |
| Video output (HDMI) | |||
| Touch-Display | |||
| Scattering-parameter measurement | |||
| Differential-parameter measurement | |||
| Limit test | |||
| Impedance conversion |
**You will find the specifications of the SHN900A here
Front Panel
- Useful shortcuts simplify setup steps for efficient testing
- 8.4 inch multi-touch screen, resolution 800*600
- Multiplexed keys for menu selection and numeric entry
- New panel design contributes to better operation and the ultimate touch screen experience
- Lightweight and portable, designed to meet the needs of field and outdoor operations
Back panel
- ① K-groove
- ② Port 1, RF signal input and output ports, 50 Ω NMD 3.5 mm Male Connector
- ③ Trig In, Trigger Input, BNC Female
- ④ Ref In, Reference Clock Input, BNC Female
- ⑤ Port 2, RF signal input and output port, 50 Ω NMD 3.5 mm Male Connector
- ⑥ GPS Ant, GPS antenna port, SMA Female Connector, Used to install GPS antenna to receive GPS satellite signals (Standard)
- ⑦ Bias Out, Bias voltage output port, 50 Ω SMB Female Connector (Standard)
- ⑧ ⑨ ⑩ Type C, USB Host, LAN, remote view and control of analyzer through web browser, keyboard and mouse
- ⑪ External power supply 12 V 4 A, for powering devices and charging batteries
- ⑧ ⑨ Read or store files to external extended memory, Ecal connection
Friendly user interface
- Adjustable Intensity of Display - Provides a display that adapts to different environments and provides good visibility under direct sunlight conditions
- Virtual Keypad - The instrument can be operated without operating the function buttons on the front panel
- Information Display Area - Touch and click for quick setting of corresponding parameters
- Screensavers - With hibernation power-saving function, hibernation time can be set to save power, effectively extend the battery operating time and battery life
Multi-Window Multi-Trace Display
- Multi-window display - supports up to 256 channels and up to 256 measurement windows. Each window can display 64 test traces at the same time
- Higher efficiency
- Clearer results
- Each window can display different measurement formats with independent cursor functions
- Rapid execution of complex test solutions
High dynamic range
Capable of measuring small signals
Meet more high dynamic range test scenarios
Measurement of highly suppressed narrowband devices such as cavity filters
Simultaneous measurement of passband and out-of-band rejection performance of filters
Segment-sweep mode
Support Segment-Sweep mode
Ideal for testing filters with high out-of-band rejection
Simultaneous measurement of multiple frequency bands with independent parameters within each band
Different number of points, frequency range, IF bandwidth, etc. can be set for each scanning segment
The list is easy to edit, you can directly click on the parameters to be edited
Flexible calibration types
- Support for user-defined calibration kits
- Facilitates testing of devices with different interface types
Electronic calibration
- ECal module includes electronic labeling - calibrated at the factory, data is stored in the memory of the ECal module, automatic calibration
- Simple calibration process - electronic calibrators need to be connected to the vector network only once
- Less uncertainty in calibration process - reduce the number of connections in the test, less human error
- Higher precision
- Reduced calibration time
- Higher Measurement Compliance
Enhanced TDA
Time Domain Reflection/Transmission Analysis
- Time Domain Analysis: accurate measurement of the characteristic impedance of the transmission line to locate the point of failure
- Time Domain Selection / Gating Function: analyze the influence of fault on device characteristics
Simulation and Analysis of Eye Charts
- Jitter Injection Function: simulating the effect of input signals with jitter on signal transmission
- Signal Integrity Analysis: internal emulation to generate eye diagrams without additional code generators
- Advanced Waveform Simulation Functions: Simulation improves signal transmission on the transmitter and receiver side of the signal
Downloads
Manual
Siglent SHN900A datasheet
Language: English
Version: EN02B
File Size: 1.78 MiB
Release Date: 20.12.2024
Siglent SHN900A User Guide
Language: English
Version: EN01
File Size: 9.74 MiB
Release Date: 26.10.2023