Accessory Siglent SDG7000A
6 of 6 Article
The SDG7000A are dual-channel arbitrary waveform generators that feature up to 1 GHz bandwidth, a maximum sample rate of 5 GSa/s and 14-bit vertical resolution.
It can generate arbitrary waveforms point by point with a maximum 2.5 GSa/s sample rate and vector signal with a maximum 500 MS/s. It also has the ability to generate a variety of signals such as continuous wave, Pulse, Noise, PRBS patterns, and a 16-bit digital bus.
The Siglent SDG7052A supports the generation of complex signals such as modulation, sweeping, bursting and dual channel copying/coupling/tracking and superposition.
The output are differential/single-ended and support a maximum output range of ± 24 V. The instrument can ensure a large amplitude under high-frequency which eliminates an external power amplifier in some applications and addresses a wider range of requirements.
The SDG7000A series integrates multiple waveform generator functions from DC to continuous waves up to 1 GHz, which can replace RF signal generators in some applications.
It adopts Siglent’s TrueArb point by point arbitrary waveform generation technology, whic h enables user adjustable output sample rates from 0.01 Sa/s to 2.5 GSa/s with excellent jitter performance and the generation of I/Q vector signals with a maximum settable bandwidth greater than 500 MHz.
Using the benefits of Siglent’s EasyPulse architect ure, a low jitter pulse with a minimum pulse width of 1 ns can be generated. The Siglent SDG7052A also features a Gaussian noise output with adjustable bandwidth, Pseudo random code generation, an optional 16 channels of digital signal output for synthesizing digi tal communications, and much more.
| Model | SDG7032A | SDG7052A | SDG7102A |
|---|---|---|---|
| Max. Frequency | 350 MHz | 500 MHz | 1 GHz |
| Resolution | 1 µHz | 1 µHz | 1 µHz |
| Sample rate | 2.5 GSa/s | 2.5 GSa/s | 2.5 GSa/s |
| Max. Sample rate (4x Interpolation) | 5 GSa/s | 5 GSa/s | 5 GSa/s |
| Max Amplitude | 24 Vpp < 40 MHz | 24 Vpp < 40 MHz | 24 Vpp < 40 MHz |
| Channels | 2 | 2 | 2 |
You will find the specifications of the SDG7000A series here.
Special Features
Rich Modulation Features
A variety of analog and digital modulation modes such as AM, FM, PM, FSK, ASK, PSK, DSB SC, and PWM are supported. There are three modulation sources: Internal, External, and Channel.
Sweep and Burst Function
Sweep supports "Linear" and "Log" modes, while Burst enables "NCycle" and "Gated" modes. Both Sweep and Burst support trigger sources: Internal, External, and Manual.
Wide Range Amplitude Output
24 Vpp analog output superimposed with ± 12 Vdc offset, providing a maximum output range of ± 24 V (48 V).
High-Speed Low Jitter Pulse
When a Square/Pulse waveform is generated by traditional DDS, there can be additional jitter if the sample rate is not an integer related multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.
Vector Signal Output (Optional)
The SDG7000A can generate common modulation types of IQ signals, such as ASK, FSK, PSK, QAM. With the innovative resampl ing technology, excellent EVM performance can be obtained at any symbol rate between 250 S/s ~ 500 MS/s. The built in digital quadrature modulator can modulate the carri er of the IQ signal to any frequency between 0 Hz ~ 1 GHz . The EasyIQ software can be used to generate and edit various types of IQ signals
Waveform Combining
Waveform Combining Superimposes CH1 and CH2 waveforms internally and provides the combined waveform to a user selected output. It easily combines basic waveforms, random noise, modulation signals, sweep signals, burst signals, EasyPulse waveforms, and TrueArb waveforms without external connections or complex editing.
True Arb Technology
With SIGLENT's TrueArb technology, the generator retains the advantages of DDS technology while overcoming the serious weaknesses of DDS jitter and distortion. Because TrueArb technology generates arbitrary waveform in a point-by-point fashion, every data point is used to generate the output signal which has been stored in memory. Date points will not missed or repeated and arbitrary waveforms possess very low jitter (< 150 ps). It supports any 8 pts ~ 8 Mpts Arb waveform with a sampling rate in a range of 1 μSa/s ~ 75 MSa/s.Downloads
Datasheet
SDG7000A Data sheet
Language: English
File Size: 2.31 MiB
Release Date: 02.03.2022
Manual
SDG7000A Manual
Language: English
File Size: 6.35 MiB
Release Date: 02.03.2022
Guide
SDG7000A Quick guide
Language: English
File Size: 2.08 MiB
Release Date: 02.03.2022