The Batronix BX448 and BX848 are extremely fast, reliable, convenient and easy to use universal gang programmers. They are based on the latest BX48 Batego technology and offer chip data transfer rates of up to 50 Mb/s per socket. Asynchronous and concurrent operation allows you to start programming immediately upon insertion of a chip.
The BX448 and BX848 are stand alone programmers. They include an embedded PC and a 19” TFT display. On the embedded PC, Windows 7 and Prog-Express are pre-installed and ready to use.
The 1 Gbit Ethernet interface allows easy updates of project and data files within a company network. The built-in 256 GB HDD allows the storage of many projects and data storage on the gang programmer.
The new Batronix Batego pin driver technology allows supporting future chips with an extremely low power supply according to JEDEC Norm JESD8-14A.01. Chips meeting this standard have to be powered with a supply voltage of 1.0 Volt with a maximum tolerance of 100 mV.
The chips are programmed at a high level of quality and reproducibility in the shortest time possible by using optimized algorithms and micro-controller managed programming times. All supported chips can be programmed directly in DIP/DIL packages and suitable adapters are available for specialized packages such as PLCC, SOP, TSOP and QFP.
|Special Features||BX448 Baplexo I / BX848 Baplexo II|
|Chip Sockets|| |
BX448: 4x 48-pindrive concurrent sockets
BX848: 8x 48-pindrive concurrent sockets
|Stand Alone Programmer|
|Chip Auto Identification|
|Automatic Programming Start|
|Ultra Low Voltage Support|
|Ultra High Speed Technology|
|Supported Devices||BX448 Baplexo I / BX848 Baplexo II|
|very old NMOS EPROM (VPP > 15 V)|
|NMOS EPROM (VPP <= 15 V)|
|EPROM (27, 27C, 87, ...)|
|EEPROM (28C, 28HC, ...)|
|NV-RAM, Timekeeper (48, DS12, ...)|
|FLASH (27E, 27SF, 28F, 28SF, 29C, 29F, ...)|
|LPC, FWH, Firmware Hubs (39, 49, ...)|
|Serial EEPROM (24, 25, 45, 93, 95, ...)|
|16 Bit EPROM, FLASH|
|PLD, SPLD, EPLD, GAL, PALCE|
|Microcontroller, MCU, PIC|
|Chip updates on customer request||Free via software updates|
Supported chip variants
Last update (day.month.year)
|Expected chip variants supported within the next 6-12 months||> 50000|
|Complete chip support list|
|Chip Data Transfer Rate||BX448 Baplexo I / BX848 Baplexo II|
|Parallel Flash Chip||up to 51.2 Mb/s each socket!|
|Serial SPI Chip||up to 10.7 Mb/s each socket!|
|Security- and Testfunctions||BX448 Baplexo I / BX848 Baplexo II|
|Pin contact test|
|Chip ID test|
|Data comparison under deviant voltages|
|Checksum calculation (EPT-1, CRC-32, ...)|
A new chip was introducted specifically for supporting the pin control functions. This new pindriver ASIC provides the performance and flexibility previously inconceivable.
The BX48, BX448 and BX848 are the only programmers in the world supporting extremely low power supply ICs according to JEDEC Norm JESD8-14A.01.
Chips meeting this standard have to be powered with a supply voltage of 1.0 V with a maximum tolerance of 100 mV.
Each of the 48 pins can be used independently and flexibly:
Batronix Prog-Express SoftwareThe operationg software, all updates and future versions are freeware and the current version can be downloaded from www.Batronix.com at any time and used without an activation key. This allows the Batronix programmers to remain current even after several years. Support for further chips is added quickly and free of charge based on customer requests, as long as these chips are supported by the hardware.
You can find the complete description at the Prog-Express page.
We would like to show you how easy it is to use the Prog-Express software and the Batronix USB programming devices in a video presentation. Within 5 minutes, you will learn how to program a chip with the data from a file, copy an existing chip, read a chip and program 20 chips in volume production mode.
We believe in the quality and advantages our products offer and invite you to buy our products risk free for 30 days today! You can test the product for 30 days and if you aren't 100% satisfied, you can send the device back and we will refund the product price!
All Batronix BX programming devices are covered by a 5 year warranty.
|Hardware Details||BX448 Baplexo I||BX848 Baplexo II|
|Interface||2x USB 2.0 High Speed, 1x 1Gbit LAN, 1x DVI|
|ZIF-socket||4x 48 Pin Aries "High Quality"||8x 48 Pin Aries "High Quality"|
|Low voltage support||downto 0.9 V|
|Dimensions [cm (inch)], device only||34.3 × 7 × 19 (13.5" × 2.76" × 7.48")||65.8 × 7 × 19 (25.9" × 2.76" × 7.48")|
|Weight without accessories / packaging||3439 g (7.58 lbs)||4913 g (10.83 lbs)|
|Weight with accessories / packaging||6216 g (13.70 lbs)||7690 g (16.95 lbs)|
|File formats||Binary, Intel-Hex, Motorola S-Records, Straight-Hex, Tektronix, Extended Tektronix, Jedec|
|File format auto detection|
|Offset||Data and chip offsets|
|Splitting||Complete 16 and 32 Bit splitting functions|
|Serial number generator||Very comfortable serial number generator with support for external serial number files|
|Checksum calculation||Checksum, MD5, SHA-1, EPT1 CRC16 and CRC32|
|Hex-Editor||Very comfortable and feature rich|
|Software remote control||Prog-Express can be remote controlled by other software with command line parameters and script files|
|Software updates||free via download|
|Supported operation systems||Windows 10, Windows 8, Windows 7, Vista, XP, Linux|
|Languages||Arabic, Bulgarian, Chinese Simplified, Chinese Traditional (software only), Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Norwegian, Polish (software only), Portuguese, Romanian, Russian, Slovenian, Spanish, Swedish, Turkish|
Release Date: 20.05.2021
O/S: Windows 10 (64/32 Bit), 8.1 (64/32 Bit), 8 (64/32 Bit), 7 (64/32 Bit), Vista (64/32 Bit), XP (64/32 Bit), Linux Ubuntu 18.04 LTS, openSuse, Fedora, Gentoo, Arch Linux
Release Date: 20.05.2021
O/S: Windows 10 (64/32 Bit), 8.1 (64/32 Bit), 8 (64/32 Bit), 7 (64/32 Bit), Vista (64/32 Bit), XP (64/32 Bit), 2000 (32 Bit), Linux Ubuntu 18.04 LTS, openSuse, Fedora, Gentoo, Arch Linux