Siglent SDS1204X HD Oscilloscope !!Special Offer!!

Features	SDS1000X HD
Channel	2 - 4
Bandwidth	100 MHz - 200 MHz
Sample rate	Single channel mode: 2 GSa/s Dual channel mode: 1 GSa/s Four channel mode: 500 MSa/s
Waveform capture rate	120.000 wfms/s (500.000 wfms/s Sequence Mode)
Memory depth	Single channel mode: 100 Mpts Dual channel mode: 50 Mpts Four channel mode: 25 Mpts

SDS1000X HD	Bandwidth	Channel	Logic Analyzer	Waveform generator
SDS1102X HD	100 MHz	2	Option	Option
SDS1104X HD	100 MHz	4	Option	Option
SDS1202X HD	200 MHz	2	Option	Option
SDS1204X HD	200 MHz	4	Option	Option

12-bit High Resolution

12-bit resolution shows you more details and less noise on the waveform.

Low noise floor

Low noise floor: Only 70 µV rms at 200 MHz bandwidth.

Up to 500.000 wfm/s waveform update rate

With a waveform update rate of up to 120.000 wfm/s, the Siglent SDS1204X HD can easily capture low-probability events. In Sequence mode the waveform capture rate can reach 500.000 wfm/s.

Record length of up to 100 Mpts/ch

Utilizing a hardware-based Zoom technique and record length up to 100 Mpts, users can select a slower timebase without compromising the sample rate and then quickly zoom in to focus on the area of interest.

Measurement for all relevant parameters and parameter statistics

Parameter measurements includes 4 categories: vertical, horizontal, miscellaneous and channel delay providing a total of 50+ different types of measurements. Measurements can be performend within a specified gate period. Measurements on math, reference and history frames are supported.

Advanced math functions

Hardware accelerated FFT up to 2 Mpts. This provides high frequency resolution with fast refresh rate. The FFT function also supports variety of window functions so that it can adapt to different spectrum measurement needs. three modes (normal, average and max hold) can satisfy different requirements for observing the power spectrum. Auto peak detection and markers are supported.

History mode

History functions records up to 80.000 triggered waveforms (frames). This is done continuously in the background, so the history waveforms can be played back at any time to find and analyze past events. Serial decode, zoom and cursors measurements can be used.

Sequence Mode

Segmented memory collection will store the waveform into multiple memory segments (up to 80.000) and each segment will store a triggered waveform together with the dead time information. The interval between segments can be as small as 2 µs. All segments can be played back at an arbitrary frame rate using the history function.

Search and navigate

The Siglent SDS1204X HD can find events within a record and history based on user specified trigger conditions. Navigate browses through events flagged by search, plays back history frames or continuosly moves the delay position on long records (useful in zoom view).

Serial bus decode

In addition to the decoder lanes correlated to the waveform, bus protocol information can be displayed in tabular form. I2C, SPI, UART, CAN, LIN, CAN FD and FlexRay are supported.

Hardware-based high speed mask test function

The Siglent SDS1204X HD utilizes a hardware-based mask test function, performing up to 80.000 Pass / Fail decisions each second. It is easy to generate user defined test templates which the signal trace can be continuously compared to. The failed frames can be automatically stored as history frames or screen shots, making it suitable for long term signal monitoring or automated production line testing.

Mask editor

Built-in mask editor application helps to create custom masks.

Power analysis

The power analysis option provides a full suite of power measurements and analysis, thus improving the efficiency of measurement in switching power supplies and power device designs.

25 MHz built-in waveform generator

The waveform generator can output waveforms with up to 25 MHz frequency and +-3 V amplitude. Six basic waveforms together with multiple types of predefined waveforms and as user defined arbitrary waveforms are supported.