Compatible Cartridges
47 of 47 Article
Innovative Tools. Excellent Service.
Descriptiom
High end 2 Channel Rework Station of the JBC Premium Line for general soldering, desoldering and cleaning jobs. The JBC DDSE is equipped with a 130W soldering Iron, a 160W desoldering Iron and an electric pump MSE-A.
Special Features
Innovative Heating System
The compact heating elements in the cartridges optimize heat transfer by reducing the thermal barriers. The fully integrated thermal sensor to the heater ensures an extremely quick temperature recovery. The JBC DDSE-2QC increases the performance by using an intelligent algorithm in the heating control system.
JBC, the most efficient soldering process
Instead of other Soldering Manufactures, JBC DDSE-2QC allows a reduction of the temperature by at least 50ºC. JBC DDSE-2QC stations only drop 35ºC (95ºF) where others drop as much as 70ºC (158ºF). Lowering the temperature reduces the risk of damaging components and improves the quality of soldering and desoldering.
JBC Sleep & Hibernation
The Sleep function automatically reduces tip temperature to 180ºC when the iron is resting in the stand. The JBC DDSE-2QC automatically goes into Hibernation when the set time in Sleep mode is finished. The power supply is cut off and tip keeps at room temperature. The tool must be in the stand for the Sleep & Hibernation functions to work.
Longer Tip life
Tip life increases exponentially by using a lower tempearture for a shorter time, as shown in the graph. JBC tips last 5 times longer than other brands thanks to the Exclusive Heating System and the Intelligent Heat Management: Sleep & Hibernation functions.
Increased Productivity
Save time by using the quick cartridge extractor, which is available in all stands and compact stations. This system designed by JBC allows the user to change cartridges quickly and safely. Without switching the JBC DDSE-2QC off, you can carry out different soldering jobs.
PC communication and firmware updates via USB
All JBC DDSE-2QC soldering stations have a USB connector. The devices can be controlled by the JBC Open Manager software and for example temperature gradients can be recorded. With the JBC Updater Software, Firmware updates can be transferred into the device. This keeps your soldering station also in the future up to date.Technical Data
| Specificationen | DDSE-2B |
|---|---|
| Weight | 9.253 kg (20.39 lbs) |
| Size | Siehe indv. Module |
| Input fuse | 2A |
| Output Peak Power | 150W |
| Temperature selection | 90-500 ºC (190-932 ºF) |
| Idle temp. stability (still air) | ±1.5ºC (±3 ºF) |
| Ambient operating temp. | 10 - 40 ºC (50 - 104 ºF) |
| Tip to ground resistance | <2 ohms |
| Tip to ground voltage | <2 mV RMS |
| Communication connectors | USB-A / USB-B / Peripheriegeräte |
| Roboter connector | RJ12 (RS-232 Protokoll)DDE: |
| Vacuum (MSE-A) | 75% / 570mmHg / 22.4inHg |
| Flow rate (MSE-A) | 9 slpm |
| ESD Safe | |
| Package weight | 10.393 kg (22.91 lbs) |
| Package dimensions | 368 x 474 x 195 mm |
JBC Soldering Accessories
12 of 12 Article
Downloads
There are no downloads available for this product.