JBC C245 + C560 Soldering Tips
69 of 69 Article
Holiday Shipping and Support Update
Our office will be closed for the Christmas holidays from 24th December to 2nd January 2026. We will be back from the 5th of January.
We wish you a Merry Christmas and a Happy New Year!
Description
High end 2 Channel Rework Station with Hot Air Station of the JBC Premium Line for professional general soldering, desoldering, repair and cleaning jobs. The JBC RMSE is equipped with a 130W soldering Iron, a 160W desoldering Iron, an electric pump MSE-A and a 700W hot air station.
Attention: Cartridges are not included!
Special Features
Innovative Heating System
The compact heating elements in the cartridges optimize heat transfer by reducing the thermal barriers. The fully integrated thermal sensor to the heater ensures an extremely quick temperature recovery. The JBC DIT-2D increases the performance by using an intelligent algorithm in the heating control system.
JBC, the most efficient soldering process
Instead of other Soldering Manufactures, JBC DIT-2D allows a reduction of the temperature by at least 50ºC. JBC DIT-2D stations only drop 35ºC (95ºF) where others drop as much as 70ºC (158ºF). Lowering the temperature reduces the risk of damaging components and improves the quality of soldering and desoldering.
JBC Sleep & Hibernation
The Sleep function automatically reduces tip temperature to 180ºC when the iron is resting in the stand. The JBC DIT-2D automatically goes into Hibernation when the set time in Sleep mode is finished. The power supply is cut off and tip keeps at room temperature. The tool must be in the stand for the Sleep & Hibernation functions to work.
Longer Tip life
Tip life increases exponentially by using a lower tempearture for a shorter time, as shown in the graph. JBC tips last 5 times longer than other brands thanks to the Exclusive Heating System and the Intelligent Heat Management: Sleep & Hibernation functions.
Increased Productivity
Save time by using the quick cartridge extractor, which is available in all stands and compact stations. This system designed by JBC allows the user to change cartridges quickly and safely. Without switching the JBC DIT-2D off, you can carry out different soldering jobs.
PC communication and firmware updates via USB
All JBC DIT-2D soldering stations have a USB connector. The devices can be controlled by the JBC Open Manager software and for example temperature gradients can be recorded. With the JBC Updater Software, Firmware updates can be transferred into the device. This keeps your soldering station also in the future up to date.Technical Data
| Specifications | RMSE-2D |
|---|---|
| Weight | See individual modules |
| Size | See individual modules |
| Input fuse | DDE: 2A / JTSE: 4A |
| Output Peak Power | DDE: 150 W per tool |
| Nominal Power | JTSE: 700 W |
| Temperature selection | JTSE: 150-450ºC (300-840ºF) |
| DDE: 90-450 ºC (190-840 ºF) | |
| Idle Temp. Stability (still air) | DDE: ±1.5ºC (±3 ºF) |
| Ambient operating temp. | 10 - 40 ºC (50 - 104 ºF) |
| Air Flow Regulation | JTSE: 10-50 SLPM |
| Flow rate | MSE: 9 SLPM |
| Vacuum | JTSE: 30% / 228 mmHg / 9 inHg |
| MSE:75%/570 mmHg/22.4 inHg | |
| Rated currrent | JTSE: 3A |
| Tip to ground resistance | DDE: <2 ohms |
| Tip to ground voltage | DDE: <2 mV RMS |
| Communication connectors | JTSE: USB-B |
| DDE: USB-A / USB-B / Peripheriegeräte | |
| Robot connector | RJ12 (RS-232 Protokoll) |
| Pedal connection | JTSE and MSE: P-005 Pedal |
| ESD Safe | |
| Package weight | 16.494 kg (36.36 lbs) |
| Package dimensions | 480 x 370 x 380 mm |
JBC Soldering Accessories
11 of 11 Article
Downloads
There are no downloads available for this product.