JBC DMPSE-2QB

Description

High end 4 Channel Rework Station of the JBC Premium Line for professional general soldering, desoldering and cleaning jobs. The JBC DMPSE-2QB is equipped with a 130W and 40 W soldering Iron, a 40 W Microtweezer and a 160W desoldering Iron, an electric pump MSE-A.

Special Features

Innovative Heating System

The compact heating elements in the cartridges optimize heat transfer by reducing the thermal barriers. The fully integrated thermal sensor to the heater ensures an extremely quick temperature recovery. The JBC DMPSE-2QB increases the performance by using an intelligent algorithm in the heating control system.

JBC, the most efficient soldering process

Instead of other Soldering Manufactures, JBC DMPSE-2QB allows a reduction of the temperature by at least 50ºC. JBC DMPSE-2QB stations only drop 35ºC (95ºF) where others drop as much as 70ºC (158ºF). Lowering the temperature reduces the risk of damaging components and improves the quality of soldering and desoldering.

JBC Sleep & Hibernation

The Sleep function automatically reduces tip temperature to 180ºC when the iron is resting in the stand. The JBC DMPSE-2QB automatically goes into Hibernation when the set time in Sleep mode is finished. The power supply is cut off and tip keeps at room temperature. The tool must be in the stand for the Sleep & Hibernation functions to work.

Longer Tip life

Tip life increases exponentially by using a lower tempearture for a shorter time, as shown in the graph. JBC tips last 5 times longer than other brands thanks to the Exclusive Heating System and the Intelligent Heat Management: Sleep & Hibernation functions.

Increased Productivity

Save time by using the quick cartridge extractor, which is available in all stands and compact stations. This system designed by JBC allows the user to change cartridges quickly and safely. Without switching the JBC DMPSE-2QB off, you can carry out different soldering jobs.

PC communication and firmware updates via USB

All JBC DMPSE-2QB soldering stations have a USB connector. The devices can be controlled by the JBC Open Manager software and for example temperature gradients can be recorded. With the JBC Updater Software, Firmware updates can be transferred into the device. This keeps your soldering station also in the future up to date.

Technical Data

Specifications	DMPSE-2QA
Weight	4.3 kg (9.3 lbs)
Size	148 x 120 x 232 mm
Input fuse	3,15A
Output peak power	160W
Temperature selection	90-450 ºC (190-840 ºF)
Idle temp. stability (still air)	±1.5ºC (±3 ºF)
Ambient operating temp.	10 - 40 ºC (50 - 104 ºF)
Tip to ground resistance	<2 ohms
Tip to ground voltage	<2 mV RMS
Communication connectors	USB-A / USB-B / Peripherals
Robot connector	RJ12
PS connector	RJ12
LAN (Ethernet)	RJ45
ESD Safe
Package weight	10.700 kg (23.58 lbs)
Package dimensions	280 x 205 x 210 mm