Micsig MDP1502

Be the first to write a review

Active differential probe, switchable

Attenuation	50:1 / 500:1
Input Impedance	16 MΩ 1.5 pF （diff） / 8 MΩ 3 pF
Bandwidth	200 MHz
Rise Time	≤ 1.75 ns
Max. Test Input	150 V (50:1) / 1500 V (500:1)
Max. Input (grounded)	CAT II 1000 V
Input Cable Length	8 cm
Output Cable Length	120 cm

Only connect to a grounded (earthed) oscilloscope!

This article is no longer available.
Alternative Article: Micsig DP1502

Description

The high-voltage differential probes of the MDP series are based on Micsig's innovative SigOFITTM technology. They are characterised by a very low noise floor, excellent amplitude-frequency characteristics and industry-leading common mode rejection, enabling users to test high frequency and high voltage signals with ease. Micsig MDP series probes can be used with oscilloscopes from all manufacturers.

Features

Quick Zero: Short-circuit the test leads, press the zero button, the probe can be zeroed very quickly.
Dual range selection: Improves the signal-to-noise ratio, meets more test requirements.
BNC interface: Standard BNC interface, works with any oscilloscope.
USB power supply: Powered directly from the oscilloscope's USB port via a Type-C cable.
Overvoltage alarm: LED flashes, buzzer "beeps" quickly and indicates an over-range alert.
Exceptionally compact: Much smaller than conventional differential probes.

Model	MDP1500	MDP1501	MDP1502	MDP1503	MDP1504	MDP1505
Bandwidth	100 MHz	150 MHz	200 MHz	300 MHz	400 MHz	500 MHz
Rise time	≤ 3.5 ns	≤ 2.33 ns	≤ 1.75 ns	≤ 1.2 ns	≤ 0.87 ns	≤ 0.7 ns
Attenuation	50 : 1 500 : 1	50 : 1 500 : 1	50 : 1 500 : 1	50 : 1 500 : 1	50 : 1 500 : 1	50 : 1 500 : 1
Accuracy	±2 %	±2 %	±2 %	±2 %	±2 %	±2 %
Max. Differential Voltage ( DC+AC PK)	150 V （20 : 1） 1500 V （200 :1）	150 V （20 : 1） 1500 V （200 :1）	150 V （20 : 1） 1500 V （200 :1）	150 V （20 : 1） 1500 V （200 :1）	150 V （20 : 1） 1500 V （200 :1）	150 V （20 : 1） 1500 V （200 :1）
Max. Common Mode Input Voltage	CAT II 1000 V CAT III 600 V	CAT II 1000 V CAT III 600 V	CAT II 1000 V CAT III 600 V	CAT II 1000 V CAT III 600 V	CAT II 1000 V CAT III 600 V	CAT II 1000 V CAT III 600 V
CMRR	DC: > 80 dB 100 kHz: > 60 dB 10 MHz: > 30 dB 100 MHz: > 26 dB	DC: > 80 dB 100 kHz: > 60 dB 10 MHz: > 30 dB 100 MHz: > 26 dB	DC: > 80 dB 100 kHz: > 60 dB 10 MHz: > 30 dB 100 MHz: > 26 dB	DC: > 80 dB 100 kHz: > 70 dB 10 MHz: > 40 dB 120 MHz: > 26 dB	DC: > 80 dB 100 kHz: > 70 dB 10 MHz: > 40 dB 120 MHz: > 26 dB	DC: > 80 dB 100 kHz: > 70 dB 10 MHz: > 40 dB 120 MHz: > 26 dB
Input impedance	16 MΩ 1.5 pF （differential） 8 MΩ 3 pF （pF(each input to ground)）	16 MΩ 1.5 pF （differential） 8 MΩ 3 pF （pF(each input to ground)）	16 MΩ 1.5 pF （differential） 8 MΩ 3 pF （pF(each input to ground)）	16 MΩ 0.5 pF （differential） 8 MΩ 1 pF （pF(each input to ground)）	16 MΩ 0.5 pF （differential） 8 MΩ 1 pF （pF(each input to ground)）	16 MΩ 0.5 pF （differential） 8 MΩ 1 pF （pF(each input to ground)）
Output voltage	≤ 3 V	≤ 3 V	≤ 3 V	≤ 3 V	≤ 3 V	≤ 3 V
Overrange	LED/buzzer	LED/buzzer	LED/buzzer	LED/buzzer	LED/buzzer	LED/buzzer
Power supply	USB Type-C	USB Type-C	USB Type-C	USB Type-C	USB Type-C	USB Type-C
Power	2 W	2 W	2 W	2 W	2 W	2 W
Cable length input	approx. 8 cm	approx. 8 cm	approx. 8 cm	approx. 8 cm	approx. 8 cm	approx. 8 cm
Cable length output	approx. 120 cm	approx. 120 cm	approx. 120 cm	approx. 120 cm	approx. 120 cm	approx. 120 cm