Innovative Tools. Excellent Service.
service@batronix.com
+49 4342 90786-30
Private Customer | Germany | EN
Manage services

Micsig MDP3001

Series MDP Measurement Probe by Micsig
Series MDP Measurement Probe by MicsigSeries MDP Measurement Probe by MicsigSeries MDP Measurement Probe by MicsigSeries MDP Measurement Probe by MicsigSeries MDP Measurement Probe by MicsigSeries MDP Measurement Probe by Micsig
Be the first to write a review

Active differential probe, switchable

Attenuation 100:1 / 1000:1
Input Impedance 16 MΩ 1.5 pF （diff） / 8 MΩ 3 pF
Bandwidth 150 MHz
Rise Time ≤ 2.33 ns
Max. Test Input 300 V (100:1) / 3000 V (1000:1)
Max. Input (grounded) CAT III 1000 V
Input Cable Length 8 cm
Output Cable Length 120 cm

  • Only connect to a grounded (earthed) oscilloscope!

This article is no longer available.

The high-voltage differential probes of the MDP series are based on Micsig's innovative SigOFITTM technology. They are characterised by a very low noise floor, excellent amplitude-frequency characteristics and industry-leading common mode rejection, enabling users to test high frequency and high voltage signals with ease. Micsig MDP series probes can be used with oscilloscopes from all manufacturers.


Features


  • 5 MHz bandwidth limitation: When measuring the FET switching frequency in most switching power supplies, the MDP probe effectively eliminates high-frequency noise.
  • Quick Zero: Short-circuit the test leads, press the zero button, the probe can be zeroed very quickly.
  • Dual range selection: Improves the signal-to-noise ratio, meets more test requirements.
  • BNC interface: Standard BNC interface, works with any oscilloscope.
  • USB power supply: Powered directly from the oscilloscope's USB port via a Type-C cable.
  • Overvoltage alarm: LED flashes, buzzer "beeps" quickly and indicates an over-range alert.
  • Exceptionally compact: Much smaller than conventional differential probes.


 

Micsig DP3000 series

Model DP3000 DP3001 DP3002 DP3003 DP3005
Bandwidth 100 MHz 150 MHz 200 MHz 300 MHz 500 MHz
Rise time ≤ 3.5 ns ≤ 2.33 ns ≤ 1.75 ns ≤ 1.2 ns ≤ 0.7 ns
Attenuation 50 : 1
500 : 1		 50 : 1
500 : 1		 50 : 1
500 : 1		 100 : 1
1000 : 1		 100 : 1
1000 : 1
Accuracy ±2 % ±2 % ±2 % ±2 % ±2 %
Max. Differential Voltage ( DC+AC PK) 300 V （50 : 1）
3000 V （500 :1）		 300 V （50 : 1）
3000 V （500 :1）		 300 V （50 : 1）
3000 V （500 :1）		 300 V （100 : 1）
3000 V （1000 :1）		 300 V （100 : 1）
3000 V （1000 :1）
Max. Common Mode Input Voltage CAT III 1000 V CAT III 1000 V CAT III 1000 V CAT III 1000 V CAT III 1000 V
CMRR DC: > -80 dB
100 kHz: > -60 dB
10 MHz: > -30 dB
100 MHz: > -26 dB		 DC: > -80 dB
100 kHz: > -60 dB
10 MHz: > -30 dB
100 MHz: > -26 dB		 DC: > -80 dB
100 kHz: > -60 dB
10 MHz: > -30 dB
100 MHz: > -26 dB		 DC: > -80 dB
100 kHz: > -60 dB
20 MHz: > -40 dB		 DC: > -80 dB
100 kHz: > -60 dB
20 MHz: > -40 dB
Input impedance 20 MΩ 1.2 pF （differential）
10 MΩ 2.4 pF （single）		 20 MΩ 1.2 pF （differential）
10 MΩ 2.4 pF （single）		 20 MΩ 1.2 pF （differential）
10 MΩ 2.4 pF （single）		 20 MΩ 1.175 pF （differential）
10 MΩ 2.35 pF （single）		 20 MΩ 1.175 pF （differential）
10 MΩ 2.35 pF （single）
Output voltage ≤ 6 V ≤ 6 V ≤ 6 V ≤ 3 V ≤ 3 V
Overrange LED/buzzer LED/buzzer LED/buzzer LED/buzzer LED/buzzer
Power supply USB Type-C USB Type-C USB Type-C USB Type-C USB Type-C
Power 2 W 2 W 2 W 2 W 2 W
Cable length input approx. 8 cm approx. 8 cm approx. 8 cm approx. 8 cm approx. 8 cm
Cable length output approx. 120 cm approx. 120 cm approx. 120 cm approx. 120 cm approx. 120 cm

Downloads

Datasheet

Adobe PDF

MDP series brochure/data sheet

Language: English
Version: V 2.0
File Size: 4.78 MiB
Release Date: 05.01.2024

Micsig MDP High Voltage Differential Probe

Manual

Adobe PDF

MDP series 100 - 200 MHz Manual

Language: English
Version: V 1.4
File Size: 1.03 MiB
Release Date: 25.12.2023

Micsig MDP High Voltage Differential Probe