Batronix BX48 Programmer mit Kabel und Software

Be the first to write a review

High quality, compact and extremely versatile universal programmer.

This article is no longer available.
Alternative Article: Batronix BX48 Batego II

Description

The new Batronix BX48 Batego is an extreme powerful, compact and easy to use universal programmer. Due to the specially developed Batronix pindriver ICs the BX48 reaches a new dimension of speed, low power consumption and compact design. State-of-the-art technology makes the BX48 the only programmer in the world which supports ICs with ultra low supply voltages of 1.0 Volt.

The BX48 Batego is very convenient with a height of just 2.5 cm and is distinguished by its design and anodized die-cast aluminum case. This makes it the programmer of choice, even in the tough service sector.

The exceptional flexibility is attained by providing all power requirements via the USB port. A power adapter or batteries are not required, since all programming voltages are provided internally by a voltage generator from the USB supply voltage.

The chips are programmed at a high level of quality and reproducibility in the shortest time possible through the use of optimized algorithms and micro-controller managed programming times. All supported chips can be programmed directly in DIP/DIL packages and suitable adapters are available for specialized packages such as PLCC, SOP, TSOP and QFP.

NEW! With the BX48 Batego II the next version of the popular BX48 is available already. In this new version the next generation of Batronix pin driver ASICs is used. Thus, the BX48 Batego II can support programming voltages up to 25 volts, necessary for very old NMOS EPROMs. The BX48 Batego I is limited to a maximum programming voltage of 15 volts.

Special Features	BX32 Batupo I	BX32P Barlino I	BX40 Bagero I	BX48 Batego I
USB Powered
Chip Auto Identification
Multi Programmer Control
Automatic Programming Start
Ultra Low Voltage Support
Ultra High Speed Technology
Multi Platform Support

Supported Devices	BX32 Batupo I	BX32P Barlino I	BX40 Bagero I	BX48 Batego I
very old NMOS EPROM (VPP > 15 V)
NMOS EPROM (VPP <= 15 V)
EPROM (27, 27C, 87, ...)
EEPROM (28C, 28HC, ...)
NV-RAM, Timekeeper (48, DS12, ...)
FLASH (27E, 27SF, 28F, 28SF, 29C, 29F, ...)
LPC, FWH, Firmware Hubs (39, 49, ...)
Serial EEPROM (24, 25, 45, 93, 95, ...)
16 Bit EPROM, FLASH
PLD, SPLD, EPLD, GAL, PALCE
Microcontroller, MCU, PIC
NAND Flash
In-System Programming (ISP) via Batronix Universal ISP Adapter
Chip updates on customer request	Free via software updates
Supported chip variants Last update (day.month.year)	12,012 27.04.2018	24,648 27.04.2018	27,987 27.04.2018	44,270 27.04.2018
Expected chip variants supported within the next 6-12 months	> 12,000	> 25,000	> 30,000	> 50,000
Complete chip support list

Chip Data Transfer Rate	BX32 Batupo I	BX32P Barlino I	BX40 Bagero I	BX48 Batego I
Parallel Flash Chip	up to 6.2 Mb/s	up to 6.2 Mb/s	up to 6.2 Mb/s	up to 51.2 Mb/s
Serial SPI Chip		up to 0.6 Mb/s	up to 0.6 Mb/s	up to 10.7 Mb/s

Security- and Testfunctions	BX32 Batupo I	BX32P Barlino I	BX40 Bagero I	BX48 Batego I
Device selftest
Pin contact test
Chip ID test
Voltage monitoring
Current monitoring
Data comparison under deviant voltages
Checksum calculation (EPT-1, CRC-32, ...)

Chip Support

In the following months and weeks, our main focus will be the development of a series of new chips and the expansion of the chip support list. You can always download the latest Prog-Express software here at no cost to keep your device up to date.

Hardware

A completely new chip was developed specifically for the pin control functions. This new pindriver ASIC provides the performance and flexibility previously inconceivable.

The BX48, BX448 and BX848 are the only programmers in the world supporting extremely low power supply ICs according to JEDEC Norm JESD8-14A.01. Chips meeting this standard have to be powered with a supply voltage of 1.0 V with a maximum tolerance of 100 mV.

Each of the 48 pins can be used independently and flexibly:

Four supply and programming voltages from 0.9 V up with 10 mV resolution!
Logic-Output
Logic-Input
High speed serial interface
Analog Input (A/D measurements with 10 mV resolution!)
Analog Output (D/A voltage output with 10 mV resolution!)
Six switchable pullup+pulldown resistors on VPP, VCC and GND
Adjustable clock frequencies up to 24.5 MHz
Ground

Software

The operationg software, all updates and future versions are freeware and the current version can be downloaded from www.Batronix.com at any time and used without an activation key. This allows the Batronix programmers to remain current even after several years. Support for further chips is added quickly and free of charge based on customer requests, as long as these chips are supported by the hardware.

You can find the complete description at the Prog-Express page.

Hardware Video Presentation

High resolution video
File size: 10 MByte

Software Video Presentation

We would like to show you how easy it is to use the Prog-Express software and the Batronix USB programming devices in a video presentation. Within 5 minutes, you will learn how to program a chip with the data from a file, copy an existing chip, read a chip and program 20 chips in volume production mode.

Time: 5 minutes
File size: 5 MByte

Chip Volume Production

For volume production of chips, up to eight BX32, BX32P, BX40 or BX48 devices can be controlled simultaneously from one PC using the Prog-Express software. These programming devices are an alternative to gang-programming devices due to their low cost and extremely high programming speeds, and also offer greater flexibility.

Read more information about cluster programming and gang programming.

Quality "Made in Germany" with a 5 year warranty period!

We believe in the quality and advantages our products offer and invite you to buy our products risk free for 30 days today! You can test the product for 30 days and if you aren't 100% satisfied, you can send the device back and we will refund the full price!

All Batronix BX programming devices are covered by a 5 year warranty.

Specifications

Hardware Details	BX32 Batupo II	BX32P Barlino II	BX40 Bagero II	BX48 Batego I
Interface	USB 2.0 Full Speed 12 Mb/s	USB 2.0 High Speed 480 Mb/s
ZIF-socket	32 Pin ECE	32 Pin Aries "High Quality"	40 Pin Aries "High Quality"	48 Pin Aries "High Quality"
Pin driver	Specialized for memory chips	Universal
Low voltage support		downto 3 V	downto 3 V	downto 0.9 V
Dimensions [cm (inch)]	9 x 8.5 x 2.5 (3.5" x 3.3" x 1")	13.7x8.5x2.5 (5.4"x3.3"x1")
Weight without accessories / packaging	155 g (0.34 lb)	162 g (0.36 lb)	167 g (0.37 lb)	257 g (0.57 lb)
Weight with accessories / packaging	349 g (0.77 lb)	356 g (0.78 lb)	361 g (0.80 lb)	451 g (1.00 lb)
Warranty	5 Years

Software Details	Prog-Express
Process control
Project management
File formats	Binary, Intel-Hex, Motorola S-Records, Straight-Hex, Tektronix, Extended Tektronix, Jedec
File format auto detection
Offset	Data and chip offsets
Splitting	Complete 16 and 32 Bit splitting functions
Serial number generator	Very comfortable serial number generator with support for external serial number files.
Checksum calculation	Checksum, MD5, SHA-1, EPT1 CRC16 and CRC32
Hex-Editor	Very comfortable and feature rich
Software remote control	Prog-Express can be remote controlled by other software with command line parameters and script files
Software updates	free via download
Supported operation systems	Windows 10 (32Bit + 64Bit), Windows 8 (32Bit + 64Bit), Windows 7 (32Bit+64Bit), Vista (32Bit + 64Bit), XP (32Bit + 64Bit), Linux (32Bit + 64Bit) und MAC OS X (32Bit + 64Bit) Additionally for BX32-BX40: Windows 2003 Server, 2000, ME, 98SE
Languages	Arabic, Bulgarian, Chinese Simplified, Chinese Traditional (software only), Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Norwegian, Polish (software only), Portuguese, Romanian, Russian, Slovenian, Spanish, Swedish, Turkish