The Batronix Professional Programmer Series offers an exceptionally flexible, simple to use and extremely fast set of eprom programmers supporting a broad range of chips. With a height of only 2.5 cm, the practical enclosure is noted for its design and anodized die-cast aluminum construction. These programming devices are your first choice even in a harsh usage environment.
The exceptional flexibility is attained by providing all power requirements via the USB port. A power adapter or batteries are not required, since all programming voltages are provided internally by a voltage generator from the USB supply voltage. The chips are programmed at a high level of quality and reproducibility in the shortest time possible through the use of optimized algorithms and micro-controller managed programming times. All supported chips can be programmed directly in DIP/DIL packages and suitable adapters are available for specialized packages such as PLCC, SOP, TSOP and QFP.
With the BX32 Batupo II a new version of the popular programming device BX32 Batupo is available now. The following improvements were implemented compared with the first version:
|Special Features||BX32 Batupo II||BX32P Barlino II||BX40 Bagero II||BX48 Batego II|
|Chip Auto Identification|
|Multi Programmer Control|
|Automatic Programming Start|
|Ultra Low Voltage Support|
|Ultra High Speed Technology|
|Multi Platform Support|
|Supported Devices||BX32 Batupo II||BX32P Barlino II||BX40 Bagero II||BX48 Batego II|
|very old NMOS EPROM (VPP > 15 V)|
|NMOS EPROM (VPP <= 15 V)|
|EPROM (27, 27C, 87, ...)|
|EEPROM (28C, 28HC, ...)|
|NV-RAM, Timekeeper (48, DS12, ...)|
|FLASH (27E, 27SF, 28F, 28SF, 29C, 29F, ...)|
|LPC, FWH, Firmware Hubs (39, 49, ...)|
|Serial EEPROM (24, 25, 45, 93, 95, ...)|
|16 Bit EPROM, FLASH|
|PLD, SPLD, EPLD, GAL|
|Microcontroller, MCU, PIC|
|In-System Programming (ISP) via Batronix Universal ISP Adapter|
|Chip updates on customer request||Free via software updates|
Supported chip variants
Last update (day.month.year)
|Expected chip variants supported within the next 6-12 months||> 12,000||> 25,000||> 30,000||> 50,000|
|Complete chip support list|
|Chip Data Transfer Rate||BX32 Batupo II||BX32P Barlino II||BX40 Bagero II||BX48 Batego II|
|Parallel Flash Chip|| |
|Serial SPI Chip|| || |
|Security- and Testfunctions||BX32 Batupo II||BX32P Barlino II||BX40 Bagero II||BX48 Batego II|
|Pin contact test|
|Chip ID test|
|Data comparison under deviant voltages|
|Checksum calculation (EPT-1, CRC-32, ...)|
Batronix Prog-Express SoftwareThe operationg software, all updates and future versions are freeware and the current version can be downloaded from www.Batronix.com at any time and used without an activation key. This allows the Batronix programmers to remain current even after several years. Support for further chips is added quickly and free of charge based on customer requests, as long as these chips are supported by the hardware.
You can find the complete description at the Prog-Express page.
We would like to show you how easy it is to use the Prog-Express software and the Batronix USB programming devices in a video presentation. Within 5 minutes, you will learn how to program a chip with the data from a file, copy an existing chip, read a chip and program 20 chips in volume production mode.
For volume production of chips, up to eight BX32, BX32P, BX40 or BX48 devices can be controlled simultaneously from one PC using the Prog-Express software. These programming devices are an alternative to gang-programming devices due to their low cost and extremely high programming speeds, and also offer greater flexibility.
Read more information about cluster programming and gang programming.
We believe in the quality and advantages our products offer and invite you to buy our products risk free for 30 days today! You can test the product for 30 days and if you aren't 100% satisfied, you can send the device back and we will refund the product price!
All Batronix BX programming devices are covered by a 5 year warranty.
|Hardware Details||BX32 Batupo II||BX32P Barlino II||BX40 Bagero II||BX48 Batego II|
|Interface||USB 2.0 Full Speed 12 Mb/s|| |
USB 2.0 High Speed
|Pin driver||Specialized for memory chips||Universal|
|Low voltage support|| ||downto 3 V||downto 3 V||downto 0.9 V|
|Dimensions [cm (inch)]|| |
9 x 8.5 x 2.5
(3.5" x 3.3" x 1")
|Weight without accessories / packaging|| |
|Weight with accessories / packaging|| |
|File formats||Binary, Intel-Hex, Motorola S-Records, Straight-Hex, Tektronix, Extended Tektronix, Jedec|
|File format auto detection|
|Offset||Data and chip offsets|
|Splitting||Complete 16 and 32 Bit splitting functions|
|Serial number generator||Very comfortable serial number generator with support for external serial number files.|
|Checksum calculation||Checksum, MD5, SHA-1, EPT1 CRC16 and CRC32|
|Hex-Editor||Very comfortable and feature rich|
|Software remote control||Prog-Express can be remote controlled by other software with command line parameters and script files|
|Software updates||~2 weekly, free via download|
|Supported operation systems|| |
Windows 10 (32Bit + 64Bit), Windows 8 (32Bit + 64Bit), Windows 7 (32Bit+64Bit), Vista (32Bit + 64Bit), XP (32Bit + 64Bit), Linux (32Bit + 64Bit) und MAC OS X (32Bit + 64Bit)
Additionally for BX32-BX40: Windows 2003 Server, 2000, ME, 98SE
|Languages||Arabic, Bulgarian, Chinese Simplified, Chinese Traditional (software only), Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Norwegian, Polish (software only), Portuguese, Romanian, Russian, Slovenian, Spanish, Swedish, Turkish|
Language: German, English
File Size: 670.52 KiB
Release Date: 27.12.2018
Release Date: 20.05.2021
O/S: Windows 10 (64/32 Bit), 8.1 (64/32 Bit), 8 (64/32 Bit), 7 (64/32 Bit), Vista (64/32 Bit), XP (64/32 Bit), Linux Ubuntu 18.04 LTS, openSuse, Fedora, Gentoo, Arch Linux
Release Date: 20.05.2021
O/S: Windows 10 (64/32 Bit), 8.1 (64/32 Bit), 8 (64/32 Bit), 7 (64/32 Bit), Vista (64/32 Bit), XP (64/32 Bit), 2000 (32 Bit), Linux Ubuntu 18.04 LTS, openSuse, Fedora, Gentoo, Arch Linux