Innovative Tools. Excellent Service.
service@batronix.com
+49 4342 90786-30
Private Customer | Germany | EN
Manage services

TekBox TBL5008-2B

TBL5008-2B Measurement Devices by TekBox, Front view
TBL5008-2B Measurement Devices by TekBox, Front viewTBL5008-2B Measurement Devices by TekBox, Rear viewTBL5008-2B Measurement Devices by TekBox, Side view
Be the first to write a review

2-path AC Line Impedance Stabilization Network (LISN) with 2 separate outputs for measurements in the frequency range from 9 kHz to 30 MHz in accordance with the CISPR16-1-2 standard for AC-supplied devices up to 250 V / 8 A.

Conducted noise can be measured on the phase and on the neutral conductor. The TBL5016-2 is equipped with an artificial hand connection.

2 years warranty

No.: TBL5008-2B

with FREE shipping within the EU!
Shipping costs outside EU
in 31-60 days after order in stock.
699.- € net (VAT Details)
831.81 € incl. 19% VAT

The TBL5008-2B is a Line Impedance Stabilization Network designed to measure conducted emissions on power supply lines in the 9kHz to 30MHz frequency range, as specified by the CISPR 16-1-2 standard. The device is designed for testing single phase, AC-powered equipment with supply voltages up to maximum 250V and 8 A. Conducted noise can be measured on the phase and on the neutral conductor. The TBL5008-2B features separate measurement outputs for each channel to enable connectivity for a common mode / differential mode separator (LISN Mate), a PE switch to mimic an extension cable and an artificial hand connection.

The device is available with country-specific EUT connectors.

SPECIFICATIONS

  • Frequency range: 9 kHz to 30 MHz
  • Impedance: 50 Ω (50 µH + 5 Ω)
  • Artificial hand: 220 pF + 511 Ω
  • Independent BNC outputs for line and neutral to provide connectivity for CM/DM separators (LISN Mate)
  • Line voltage: max. 250V / 50/60 Hz or DC
  • Max. current: 8 A
  • Switchable PE: 50 Ω / 50 µH; simulates effects of extension cable drums for power tools
  • Separate BNC outputs for line and neutral to provide connectivity for CM / DM separators (LISN Mate)
  • Chassis grounding: protruding, stainless steel bottom panel, with 4mm mounting slots and holes • Weight and dimensions: 8 kg; 35 cm x 18 cm x 41 cm

APPLICATION

  • EMC pre-compliance testing of conducted noise

Model Overview


Model Impedance Frequency Range Path Max. Current Max. Voltage Additional Features
TBL00705-2 0.7µH//50Ω 30 Hz – 500 MHz 2 5A 60V nominal, Component rating: 100V 400mΩ serial resistor
ТВL0110-2 1µH//50Ω 30 Hz – 500 MHz 2 10A 60V nominal, Component rating: 100V 100mΩ serial resistor
TBL0225-2 2µH//50Ω 10 Hz – 200 MHz 2 25A 60V nominal, Component rating: 100V 100mΩ serial resistor
TBOH01 5µH//50Ω 150 kHz – 108 MHz 1 10A 60V nominal, Component rating: 200V EOL
TBL0510-1 5µH//50Ω 10 kHz – 400 MHz 1 10A 60V nominal, Component rating: 200V
TBL0550-1 5µH//50Ω 150 kHz – 108 MHz 1 50A 60V nominal, Component rating: 250V
TBL05100-1 5µH//50Ω 150 kHz – 108 MHz 1 100A 60V nominal, Component rating: 350V AC@50/60Hz 600V DC Can be jumpered to various standards
TBL05100-1B 5µH//50Ω 150 kHz – 108 MHz 1 100A Component rating: 0-500V @ 50/60 Hz 250V AC @ 400Hz 1000V DC Can be jumpered to various standards

Model Impedance Frequency Range Path Max. Current Max. Voltage Additional Features
TBL5016-1 50µH//50Ω (50µH+5Ω)//50Ω 150 kHz – 30 MHz 1 16A 250V can be jumpered 50µH//50Ω or (50µH+5Ω)//50Ω no 250uH pre-filter
TBL50100-1 50µH//50Ω (50µH+5Ω)//50Ω 150 kHz – 30 MHz 1 100A 250V can be jumpered 50µH//50Ω or (50µH+5Ω)//50Ω no 250uH pre-filter
TBL5008-2B (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 8A 250V AC 50/60 Hz or DC separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH
TBL5008-2C (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 8A 250V AC 50/60 Hz or DC Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-2B (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 16A 250V AC 50/60 Hz or DC separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-2C (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 16A 250V AC 50/60 Hz or DC Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 16A 465V/270V Artificial hand connection PE switchable: 50Ω//50µH
TBL5032-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 32A 465V/270V Artificial hand connection PE switchable: 50Ω//50µH
TBL5063-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 63A 690V/400V 50Hz/60Hz Artificial hand connection PE switchable: 50Ω//50µH

Model Impedance Frequency Range Path Max. Current Max. Voltage Additional Features
TBLM2
150 kHz – 110 MHz
LISN-Mate
TBLDC32-2 150 Ohm 9 kHz – 30 MHz 2 32A 1000V DC 150 Ohm DC LISN A, B,
Common-Mode Differential-Mode operation
TBLVHF-B 50 Ohm +-10% 30 MHz – 300 MHz 2 16A 250V DC – 400 Hz Balanced VHF LISN
TBISN-T4 150 Ohm 150 kHz – 30 MHz 2 balanced pairs 250mA 60V AC, 100V DC 2 pcs D-Sub 25 to RJ45 adapter

Downloads

Datasheet

Adobe PDF

TBL5008-2B Manual / Data sheet

Language: English
Version: V1.1
File Size: 1.62 MiB
Release Date: 10.03.2025