Name: Rigol DS2202
Brand: Rigol
Availability: Discontinued

Models with 2 channels

DS2072

DS2102

DS2202

Bandwidth

70 MHz

100 MHz

200 MHz

Max. Sample rate

2 GSa/s

Memory (standard, 1 CH)

14 Mpts
56 Mpts (option)

Special Features

Great accuracy, low noise input

The DS2000 is able to measure very small signals, thanks to the measurement input stage which was newly developed by Rigol. The vertical resolution starts at 500uV (0.5 mV) per division. The screenshot shows the measurement of a scant 1 millivolt a squarewave signal (yellow).

Perfect frequency response design

The new measuring input stages behave almost perfectly even at the frequency response. On the screenshot you see a signal with a rise time of just 1.4 nanoseconds, with an amplitude of about 5 millivolts. The overshoot is below 5%.

Deeper Memory (14 Mpts / 56 Mpts)

The Rigol DS2000 oscilloscopes can store up to 14 million measurement points. You can zoom into a selected part of the captured waveforms to get more details and scroll within the measurement points. With the optional memory module MEM-DS2 even 56 million data points are available. The memory expansion module "MEM-DS2" is available on this page under the "accessories? tab.

Realtime waveform record, replay, analysis

The very high sampling rate of the Rigol DS2000 Oscilloscope and the large memory makes it possible to record up to 50,000 waveforms per second. The recorded waveforms can be conveniently displayed and analyzed.

Multi-Level Intensity Grading Display

With the "Multi-Level Grading Intensity" display, extensive signal characteristics with a very large number of measurement values can also be displayed completely.

Serial bus trigger functions (RS232, I²C, SPI)

Triggering on serial bus systems (RS232/UART, I ² C and SPI) is already included.

Serial bus decoding function

With the optional "SD-DS2 Decoding Kit" serial data packages of different serial bus systems can be analyzed, decoded, and displayed directly as byte values. Supported protocols are: RS232/UART, I²C, and SPI. The serial decoding module "SD-DS2" is available on this page under the "accessories" tab.

Comprehensive trigger functions

The Rigol DS2000 oscilloscopes offer comprehensive trigger options, allowing a professional use. The special trigger "Windows", "Nth Edge", HDTV, delay, time out, duration and USB are available with the optional "AT-DS2 Advanced Trigger" module, available on this page under the ?Accessories? tab.

Runt Trigger

In the "runt trigger" mode, the scope can trigger on dwarf pulses. Dwarf pulses are short pulses that do not reach the full amplitude. For this trigger mode three voltage thresholds can be defined (eg, 10%, 50% and 90%). If the signal passes the first two thresholds in one direction, but doesn?t reach the third, the trigger fires.

$Screenshot Advanced Math$

Advanced Math

The DS2000 series oscilloscopes comes with a modern and advanced math system which lets it solve complicated signal calculations quite simply with user defined formulas.

Masked Pass/Fail-Tests

Pass/fail testing can be used for troubleshooting in various environments like communication networks. Features: User defined masks, Pass/Fail counts, Stop on Fail, Fail Alarm

Auto measurements with statistics

The oscilloscope measures up to five parameters like rise- and fall-time, amplitude, pulse width, duty cycle and many more simultaneously and shows statistics for every parameter (max- , min- and average values).

General Data

Digital Oscilloscope Rigol DS2202

Display

20.32 cm (8") WVGA-Color-LCD

Resolution

800 × 480 Pixel

Interface

USB-host for i.e. USB sticks
USB-Device for a PC connection or USB Pict-Bridge printerinterface
LAN for network connectivity (LXI compilant)
GPIB (IEE-488, General Purpose Interface Bus) using the optional USB-GPIB Module
Trigger- and Calibrationoutput

Size (W × H × D)

36.2 cm × 18.0 cm × 13.1 cm
14.25" × 7.09" × 5.16"

Weight

3.9 kg
8.6 lbs

Supported operation systems

Windows XP (32Bit + 64Bit)
Windows Vista (32Bit + 64Bit)
Windows 7 (32Bit + 64Bit)

Oscilloscope Functions

Digital Oscilloscope Rigol DS2202

Channels

Real-time sample rate

up to 2 GSa/s realtime (1 Channel)

Bandwidth

200 MHz

Sampling Modus

Normal, average, peak detect

Mathematics

userdefined, FFT (Fast Fourier Transform)

FFT windows

Rectangle, Hanning, Hamming, Blackman

Signal Bus Decoding

RS232/UART (option), I²C (option), SPI (option)

Signal

Digital Oscilloscope Rigol DS2202

Input

DC/AC coupling, CAT I 300 Vrms, CAT II 100 Vrms

Real-time sample rate

up to 2 GSa/s realtime (1 Channel)

Time base

DS2202: 2 ns/div to 1000 s/div
DS2072/DS2102: 5 ns/div to 1000 s/div

Memory

14 Mpts (1 Channel)
56 Mpts (1 Channel) with memory option MEM-SD2

Vertical

Digital Oscilloscope Rigol DS2202

Analog digital converter (A/D)

12 Bit at ≥ 5 µs/div
8 Bit at ≤ 2 µs/div

Sensitivity range (V/div)

500 µV/div to 5 V/div

Offset range

500 µV/div to 10 V/div

Trigger

Digital Oscilloscope Rigol DS2202

Trigger

Channel, Ext

Signal system and line/field frequency (Video triggering mode)

PAL, NTSC, SECAM
480P, 576P, 720P, 1080P and 1080I HDTV standards

Triggerfunctions

Edge, Pulse, Slope, Video, Pattern, RS232/UART, I²C, CAN, USB, FlexRay

Measurement

Digital Oscilloscope Rigol DS2202

Cursor measurement

Manual, Track and Auto Measure modes

Auto measurement

Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Delay1-2 (rise), Delay1-2(fall), Phase1-2 (rise), Phase1-2 (fall)