Name: Keysight DSOX3104T
Brand: Keysight
Availability: Discontinued

Features

DSOX3002T

DSOX3004T

Channel

Bandwidth

100 MHz - 1 GHz

Sample rate

5 GSa/s half channels 2.5 GSa/s all channels

Waveform capture rate

1000000 wfms/s

Memory depth

4 Mpts half channels 2 Mpts all channels

Waveformgenerator

Option

Logic analyzer

Option

InfiniiVision DSOX3000TX (2 channel) (MSO Sets)

Bandwidth

Waveformgenerator

Logic analyzer

DSOX3012T

100 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3012T

100 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3022T

200 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3022T

200 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3032T

350 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3032T

350 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3052T

500 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3052T

500 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3102T

1 GHz

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3102T

1 GHz

Option (DSOX3WAVEGEN)

InfiniiVision DSOX3000TX (4 channel) (MSO Sets)

Bandwidth

Waveformgenerator

Logic analyzer

DSOX3014T

100 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3014T

100 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3024T

200 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3024T

200 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3034T

350 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3034T

350 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3054T

500 MHz (upgradeable)

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3054T

500 MHz (upgradeable)

Option (DSOX3WAVEGEN)

DSOX3104T

1 GHz

Option (DSOX3WAVEGEN)

Option (DSOXT3MSO)

MSOX3104T

1 GHz

Option (DSOX3WAVEGEN)

Special features

Integrated mixed signal oscilloscope (MSO - optional)

The 3000T X-Series offers 16 optional, integrated and upgradable digital channels. Digital content is everywhere in today’s designs and traditional 2 and 4 channel oscilloscopes do not always provide enough channels for the job at hand. With an additional 16 integrated digital channels, you now have up to 20 channels of time-correlated acquisition and viewing on the same instrument. In addition to offering powerful triggering across the analog and digital channels, this also gives you additional channels to use for serial decode and triggering. And if you buy a 2 or 4 channel DSO, you can upgrade it at any time to an MSO with a software license and 16-channel logic probe.

Integrated WaveGen: Built-in 20 MHz function/arbitrary waveform generator (optional)

The 3000T X-Series offers an integrated 20 MHz function/arbitrary waveform generator, available with modulation support (DSOX3WAVEGEN). The function generator provides stimulus output of sine, square, ramp, pulse, DC, Sinc (x), exponential rise/fall, cardiac, Gaussian Pulse and noise waveforms to your device under test. The modulation feature supports AM, FM, and FSK modulations with modulation shapes of sine, square, and ramp. The generator can output a continuous or a single-shot waveform. With AWG functionality, you can store waveforms from analog channels or reference memory to the arbitrary memory and output from WaveGen.

Frequency response analysis (optional)

Frequency Response Analysis (FRA) is an often-critical measurement used to characterize the frequency response (gain and phase versus frequency) of a variety of today’s electronic designs, including passive filters, amplifier circuits, and negative feedback networks of switch mode power supplies (loop response). InfiniiVision 3000T X-Series oscilloscopes use the oscilloscope’s built-in waveform generator (WaveGen) to stimulate the circuit under test at various frequency settings and capture the input and output signals using two oscilloscope channels. At each test frequency, the oscilloscope measures, computes, and plots gain (20LogVout/Vin) and phase logarithmically.

Standard 8-digit counter and totalizer

Traditional oscilloscope counter measurements offer only five or six digits of resolution, which may not be enough for the most critical frequency measurements are being made. With the 3000T X-Series’ standard 8-digit counter, you can see your measurements with the precision you would normally expect only from a standalone counter. Because the integrated counter measures frequencies up to a wide bandwidth of 1.0 GHz, you can use it for many high-frequency applications as well.

Hardware Accelerated Mask/Limit Testing (Option)

Whether you are performing pass/fail tests to specified standards in manufacturing or testing for infrequent signal anomalies, mask/limit testing can be a valuable productivity tool. The 3000T X-Series features powerful hardware-based mask testing that can perform up to 270,000 tests per second. You can select multiple test criteria, including the ability to run tests for a specific number of acquisitions, a specified time, or until detection of a failure.

Video Analysis (Option)

Whether you are debugging consumer electronics with HDTV or characterizing a design, Enhanced Video Analysis (optional) provides support for a variety of HDTV standards for triggering and analysis.