The 2- and 4-channel instruments provide bandwidths of 300, 400 and 500MHz, a sampling rate of 4GSa/s and a memory depth of 8MPts. The instruments are rounded off with a standard inclusion of the MSO functionality and several options for serial bus analysis to meet all requirements of modern development designs.
Rohde & Schwarz is offering the new R&S® HMO3000 series exclusively as mixedsignal oscilloscopes. It is also unnecessary to initially activate the mixed-signal functions via software options, as is the case with other suppliers. The low capacitance logic probe R&S® HO3508 (also available as double pack HO3516) is optional. It allows the analysis of up to 16 logic channels with a sampling rate of 1 GSa/s. The logic probe is not linked to a specific instrument serial number. This allows its use with all digital oscilloscope of the R&S® HMO series.
For communications between embedded systems and the environment the Rohde & Schwarz HMO3034 includes hardware-based signal triggering and decoding for all common protocols (I2C, SPI, UART, CAN and LIN). This option can be activated with an upgrade voucher at any time.
The integrated three-digit digital voltmeter enables service technicians to simultaneously perform voltage measurements on all analog channels with four values totalling.
The segmented memory option R&S® HOO14 enables you to divide the available memory of your Rohde & Schwarz HMO3034 into up to 1000 segments. This procedure allows sampling rates of 200 000 Wfm/s, which makes it possible to capture rare anomalies occurring during many short events in quick succession. For the analysis of the recorded signals, all measurement functions of the R&S® HMO are available, including the Pass/Fail function.
Thanks to the FFT analysis function with 64 k test points the Rohde & Schwarz HMO3034 keeps pace with significantly larger oscilloscopes also in the frequency domain. The time domain signal, measurement window, FFT analysis result are displayed together on a single screen, which makes it easier to evaluate the input waveform.
The Rohde & Schwarz HMO3034 offer time domain, logic, protocol and frequency analysis in a single instrument and belong to the Rohde & Schwarz scope-of-the-art family of oscilloscopes.
|Bandwidth||300 MHz||400 MHz||500 MHz||300 MHz||400 MHz||500 MHz|
|Sampling Rate||4 GSa/s||4 GSa/s||4 GSa/s||4 GSa/s||4 GSa/s||4 GSa/s|
|Capture Rate [wfms/s]||200.000||200.000||200.000||200.000||200.000||200.000|
|Memory||8 Mpts||8 Mpts||8 Mpts||8 Mpts||8 Mpts||8 Mpts|
|Logic Analyzer (Probe optionally)|